2000 Subaru Legacy

engine emits smoke when cold

Brake hose has slight corrosion to ferrules all 4 rear (3.6.B.4e)

Brake pipe slightly corroded all steel. all pipes have plastic sleaving (3.6.B.2c)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Tyre worn close to the legal limit soft (4.1.E.1)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

all suspension components have surface rust

Nearside Front Brake hose ferrule excessively corroded (3.6.B.4e)

Nearside Rear Brake hose ferrule excessively corroded both (3.6.B.4e)

Offside Front Brake hose ferrule excessively corroded (3.6.B.4e)

Offside Rear Brake hose ferrule excessively corroded both (3.6.B.4e)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

all brake pipes starting to corrode

front and rear discs rusty

o/s and n/s sill covers fitted at time of test

Brake pedal anti-slip provision incomplete (3.3.A.1b)

Fuel system component leaking filler neck (7.2.3)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Headlamp aim too high (1.8)

Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Rear Inner Suspension component mounting prescribed area is excessively corroded seal (2.4.A.3)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Upper Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Rear Tyre worn close to the legal limit worn on inner edge (4.1.E.1)

Rear Anti-roll bar has slight play in a pin/bush D bushes (2.4.G.2)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Sub-frame corroded and seriously weakened (2.4.G.1)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Service brake: efficiency below requirements (3.7.B.7)