MOT Status
ValidMileage
253,764 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Offside Rear chassis rail corroded
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Brake pipe corroded, covered in grease or other material both front (1.1.11 (c))
Offside Rear chassis rail corroded
Nearside Headlamp aim too high (4.1.2 (a))
Offside Headlamp aim unable to be tested (4.1.2 (b))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Headlamp not working on main beam (4.1.1 (a) (ii))
Offside Rear fog lamp not working (4.5.1 (a) (ii))
Service brake excessively binding both front (1.2.1 (f))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Rear chassis rail corroded
Brake pipe corroded, covered in grease or other material both front (1.1.11 (c))
Headlamp has a product on the lens but not seriously reducing light output both (4.1.4 (b))
Service brake binding but not excessively both front (1.2.1 (f))
both rear outer sills corroded
front radiator lower panel corroded
offside rear inner sill corroded
Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Front Brake pad(s) wearing thin inner pads approx 3mm (1.1.13 (a) (ii))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Front Lower Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer and inner sill (5.3.6 (a) (i))
both rear axle bump stops missing
Offside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Front Brake pad(s) wearing thin inner pads approx 3mm (1.1.13 (a) (ii))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Front Lower Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer and inner sill (5.3.6 (a) (i))
both rear axle bump stops missing
o/s/r tyre sidewall cracked and perished
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Headlamp light intensity severely reduced full and dip (4.1.4 (a))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))
Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Offside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Offside Stop lamp not working (1.2.1b)
Exhaust tailpipe not capable of allowing the emission probe to be inserted (7.4.B.1)
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside front brake binding (3.7.B.1)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Stop lamp not working (1.2.1b)
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Bonnet retaining device excessively deteriorated (8.4.2) DANGEROUS
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
front brakes kicking in roller brake tester
offside front steering rack arm has slight play
rear brakes have a slight kick in roller brake tester
Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Exhaust has part of the system slightly deteriorated (7.1.1a)
both sides front brakes binding slightly
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
S366 VWE is a 1998 Mazda Bongo in White with a 2,490cc diesel engine. This vehicle has been through 25 MOT tests with a personal pass rate of 76%.
Across all 1998 Mazda Bongo models, the average MOT pass rate is 67.1% with a typical mileage of 125,789 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying S366 VWE, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 28 years old, this Mazda Bongo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of S366 VWE?
You can check the full history of S366 VWE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was S366 VWE registered?
S366 VWE is a 1998 Mazda Bongo, first registered on 31 December 1998.
Is S366 VWE safe to buy?
The MOT history for S366 VWE shows 25 tests with a 76% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does S366 VWE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on S366 VWE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.