1999 Honda Cr-v

Front Horn sounds harsh or grating (1.6.2e)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Headlamp aim too low (1.8)

Nearside Rear Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Registration plate lamp not working (1.1.C.1d)

Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a) DANGEROUS

Front Tyre worn close to the legal limit (4.1.E.1)

Brake pipe excessively corroded (3.6.B.2c)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Lower Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Nearside Stop lamp not working (1.2.1b)

Offside Front Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)

Offside Front coil spring cracked (2.4.C.1a)

Offside Rear Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Front Tyre worn close to the legal limit (4.1.E.1)

Brake pipe slightly corroded (3.6.B.2c)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

coil spring corroded (2.4.C.1b)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Brake pipe excessively corroded (3.6.B.2c)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Front position lamp(s) not working (1.1.A.3b)

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Headlamp aim too low (1.8)

Nearside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Registration plate lamp not working (1.1.5c)

Brake pipe slightly corroded (3.6.B.2c)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

coil spring corroded (2.4.C.1b)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

both front lower ball joint rubbers deteriorated but no wear detected in ball joints.

Offside Front Tyre worn close to the legal limit (4.1.E.1)

both front lower ball joint rubbers deteriorated but no wear detected in ball joints.

Nearside Front brake disc slightly pitted (3.5.1h)

Offside Front brake disc slightly pitted (3.5.1h)

Centre Exhaust has part of the system excessively deteriorated (7.1.1a)

Exhaust tailpipe not capable of allowing the emission probe to be inserted (7.3.D.1)

Nearside Front Upper Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front position lamp(s) not working (1.1.A.3b)

Parking brake: efficiency below requirements (3.7.C.1b)

Service brake: efficiency below requirements (3.7.C.1a)

Nearside Front brake disc slightly pitted (3.5.1h)

Offside Front brake disc slightly pitted (3.5.1h)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front registration plate insecure (6.3.1b)

Nearside Front coil spring incomplete (2.4.C.1a)

Offside Front Upper Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)

Offside Front Wheel nut(s) missing (4.2.A.1e)

Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

nearside front lower ball joint rubber sleeve deteriated no play.