1998 Honda Shuttle

Front Upper Suspension arm ball joint dust cover severely deteriorated both (5.3.4 (b) (i))

Rear Exhaust has a minor leak of exhaust gases joint (6.1.2 (a))

Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Position lamp not working (4.2.1 (a))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Position lamp not working (4.2.1 (a))

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Upper Suspension arm ball joint dust cover severely deteriorated both (5.3.4 (b) (i))

Rear Exhaust has a minor leak of exhaust gases joint (6.1.2 (a))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Upper Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Nearside+Offside Wheel Arch (6.2.2 (d) (i))

Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt both front (2.4.G.2)

Nearside Front Upper Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front track rod arm (rose joint) has slight movement but is not excessive.

Oil leak ()

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt both front (2.4.G.2)

Front position lamp(s) not working both front (1.1.A.3b)

Nearside Front Upper Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front track rod arm (rose joint) has slight movement but is not excessive.

Oil leak ()

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

Trailing arm rubber bush deteriorated but not resulting in excessive movement both rear (2.4.G.2)

exhaust system badly corroded within the limit.

o/s/f and o/s/r tyre worn on edges within the limit.

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside rear brake binding (3.7.B.1)

Offside Registration plate lamp not working (1.1.C.1d)

Oil leak

both front anti roll bar link bushes cracked but not resulting in excessive movement.

Oil leak

Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Headlamp not working on main beam (1.7.5a)

rear brake application uneven (3.7.B.2)

rear brakes release unevenly (3.7.B.4)

Oil leak

Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Radius arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Radius arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear bumper insecure

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Engine/gearbox mounting(s) defective

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Stop lamp not working (1.2.1b)

Rear Registration plate lamp not working (1.1.5c)

Windscreen washer provides insufficient washer liquid (8.2.3)