1998 BMW F650

Headlamp aim headlamp deteriorated but function not impaired (1.2.3a)

can not check fork seals due to gaters fitted.

Headlamp aim too low (1.6)

Nearside Front Brake component has restricted free movement and operation is likely to be impeded caliper bolt rubbing on brake disc (3.2.A1h)

Nearside Front Brake pipe inadequately supported securing clamp bolt loose. (3.2.B2b)

Offside Front Front wheel spindle securing nut locking device missing axle pinch bolt broken. (2.3.3a)

Headlamp aim headlamp deteriorated but function not impaired (1.2.3a)

Steering control has Insufficient clearance at full lock affecting the riders operation of the controls mirror hitting screen. (2.1.2b)

can not check fork seals due to gaters fitted.

Front shock absorber seal failed and leaking oil (2.3.3)

Drive chain slightly tight (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Front Wheel corroded but not significantly reducing the original strength (4.2.1a)

Drive chain slightly tight (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Front Wheel corroded but not significantly reducing the original strength (4.2.1a)

Drive chain worn but not considered excessive (6.2.1e)

Front Wheel corroded but not significantly reducing the original strength (4.2.1a)

Drive chain slightly loose (6.2.1d)

Front Wheel corroded but not significantly reducing the original strength (4.2.1a)

Front Wheel spoke slightly corroded. (4.2.1b)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre worn close to the legal limit (4.1.3(ii))

Nearside Rear Direction indicator not working (1.5.1c)

Rear suspension bearing excessively deteriorated (2.4A.2a(i))

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Front Tyre worn close to the legal limit (4.1.3(ii))

Front suspension has a slightly reduced damping effect (2.3.6c)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear Brake hose slightly chafed (3.2.B3a)