1998 Triumph Daytona

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain excessively loose (6.1.7 (c) (i))

Registration plate does not conform to the specified requirements (0.1 (d))

Rear brake pedal slightly stiff to operate

Stop lamp with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Exhaust noisy (7.1.2)

Offside Rear Brake disc(s) slightly scored (3.2.A1l)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Fuel tank leaking WHEN TILTING BIKE TO CHECK REAR WHEEL LEAKING FROM FUEL CAP AREA (7.2.1a)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Nearside Rear Footrest insecure (6.2.1a)

Offside Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Offside Front Front shock absorber seal failed and leaking oil (2.3.3)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Exhaust noisy (7.1.2)

Nearside Drive chain slightly loose (6.2.1d)

Offside Rear Brake disc(s) slightly scored (3.2.A1l)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Drive chain slightly loose (6.2.1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Steering movement slightly 'notchy' (2.2.1b)

Steering movement slightly 'notchy' (2.2.1b)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Rear suspension bush has excessive free play (2.4.A2a(i))

Rear wheel bearings have excessive free play (2.4.A.2c)

Front Faring Stay Fractured

Rear wheel bearings have slight free play (2.4.A.2c)

Drive chain slightly loose (6.2.1d)

Roller brake test Higher brake efficiency normally obtainable. (3.3.A2b)

Nearside Headlamp aim too low (1.6)

Offside Headlamp aim too low (1.6)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Throttle has a significant change in engine speed whilst moving the steering from lock to lock (2.1.4)

Drive chain slightly loose (6.2.1d)

Roller brake test Higher brake efficiency normally obtainable. (3.3.A2b)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Nearside Headlamp aim not tested (1.6)

Offside Headlamp aim too low (1.6)

Rear Brake back plate(s) insecure (3.2.A1j)

front tyre worn uneven

play in front floating discs