1999 Honda Cr-v

Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Fuel pipe/s corroded

Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

both rear tyres slight cracks

rear exhaust deteriorated

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear Brake pipe excessively corroded (3.6.B.2c)

Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Fuel pipe/s corroded

Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

both rear tyres slight cracks

rear exhaust deteriorated

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside front brake binding (3.7.B.1)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front coil spring broken (2.4.C.1a)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Inner Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Inner Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

brake warning light on

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Nearside Front coil spring incomplete (2.4.C.1a)

Nearside Inner Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Inner Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Inner Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Non obligatory mirror damaged

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

temporary repair to rear anti rollbar inner bushes

Centre Stop lamp not working (1.2.1b)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Non obligatory mirror damaged

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

temporary repair to rear anti rollbar inner bushes

Nearside Rear Anti-roll bar attachment bracket inappropriately repaired (2.4.A.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)

Offside Rear Anti-roll bar attachment bracket inappropriately repaired (2.4.A.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)

Nearside Inner Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Radius arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Registration plate lamp not working (1.1.5c)

Offside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Offside Inner Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Radius arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Registration plate lamp not working (1.1.5c)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tie bar/rod worn but not seriously weakened (2.4.G.1)