2005 Mazda Bongo

Brake performance unable to be tested (1.2.1 (g))

Emissions unable to be completed (8.2.1.2 (d))

Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Radiator crossmember / tow hook (6.1.1 (c) (i))

Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg (6.1.1 (c) (i))

Offside Front Brake pipe likely to become detached or damaged (1.1.11 (d) (ii))

Offside Front Inner Integral body structure inadequately repaired such that structural rigidity is significantly reduced weld repair at brake pipe (6.1.1 (d) (i))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wheel arch (6.1.1 (c) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg (6.1.1 (c) (i))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Front Brake pipe corroded, covered in grease or other material Front to rear undersealed (1.1.11 (c))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Integral body structure is repaired but structural rigidity is not significantly reduced Multiple weld repairs on sills/floor covered in underseal (6.1.1 (d) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Integral body structure is repaired but structural rigidity is not significantly reduced Multiple weld repairs on sills/floor covered in underseal (6.1.1 (d) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Passenger seat(s) missing at time of test rearmost ()

Suspension component mounting repair covered in underseal various inner sill repairs (5.3.6 (a) (i))

front foglamps not working

various components corroded/undersealed

Emissions unable to be completed due to exhaust (8.2.1.2 (d))

Exhaust has a major leak of exhaust gases link pipe (6.1.2 (a))

Headlamp lens seriously defective both (4.1.1 (b) (ii))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill and outrigger (5.3.6 (a) (i))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg (6.1.1 (c) (i))

Offside Front Battery insecure and likely to fall from carrier (4.13 (a) (ii))

Offside Headlamp light intensity severely reduced (4.1.4 (a))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Rear fog lamp does not face the rear (4.5.4 (a))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength mid inner sill (5.3.6 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Windscreen washer not working both and blades not tested (3.5 (a))

Exhaust fumes causing a danger to health of persons on board (6.1.2 (b) (ii)) DANGEROUS

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Passenger seat(s) missing at time of test rearmost ()

Rear Exhaust mounting defective (6.1.2 (a))

both front inner sills holed

front fog lamps not working

various components corroded/undersealed

various inner sill repairs covered in underseal

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Battery insecure and likely to fall from carrier (4.13 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch holed within 30cm of trailing arm front mount (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength holed within 30cm of offside front subframe rear mounting (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch holed within 30cm of strut top mount (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis holed at wheel arch less than 30cm from trailing arm front mounting (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill holed within 30cm of trailing arm front mounting (5.3.6 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear inner sill holed outwith any prescribed areas

Offside Front Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Offside Front inner wheel arch holed outwith prescribed areas

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

front number plate deteriorated but not likely to be misread

front radiator lower mounting heavily corroded and holed

heavy use of underseal on underside of vehicle

nearside front inner sill holed in various places outwith any prescribed areas

nearside outer sill holed outwith any prescribed areas

nearside rear body badly corroded at various places outwith any prescribed areas behind wheel arch

nearside rear exhaust silencer mounting bracket broken due to heavy corrosion

offside front inner sill holed in various places outwith any prescribed areas

vehicle heavily corroded on underside of vehicle in various places, although not considered excessive or outwith any prescribed areas.

Rear Brake pipe corroded, covered in grease or other material Across axle (1.1.11 (c))

Various steering, suspension and chassis components corroded but not affecting strength

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Rear Brake pipe corroded, covered in grease or other material Across axle (1.1.11 (c))

Various steering, suspension and chassis components corroded but not affecting strength

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill corroded within 30 cm of mount (5.3.6 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect Unclear and dull (4.1.2 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill corroded within 30 cm of mount (5.3.6 (a) (i))

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Central part of sill corroded within 30 cm of mount (5.3.6 (a) (i))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill corroded within 30 cm of mount (5.3.6 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect Unclear and dull (4.1.2 (c))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Rear Brake pipe corroded, covered in grease or other material Across axle (1.1.11 (c))

Various parts of suspension, steering, and chassis components corroded but not seriously affecting strength

Exhaust emissions CO limits high indicating need of repair/possible CAT fault

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced Radiator crossmember corroded/Radiator insecure (6.1.1 (c) (i))

Headlamps slightly deteriorted

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Vehicle body corroded wheel arches/outer sills

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Battery insecure and likely to fall from carrier Both batteries (4.13 (a) (ii))

Nearside Rear Anti-roll bar linkage pin or bush excessively worn D bush (5.3.4 (a) (i))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Anti-roll bar linkage pin or bush excessively worn D bush (5.3.4 (a) (i))

Body Corroded

Both front headlamps deteriorated

Emissions CO limit very high indicating need of repair

Exhaust heatshielding loose

Front Vehicle structure is corroded but structural rigidity is not significantly reduced Radiator crossmember (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Battery insecure but not likely to fall from carrier Both batterys (4.13 (a) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced Radiator crossmember (6.1.1 (c) (i))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner and outer sill (6.1.1 (c) (i))

Nearside Rear Anti-roll bar pin or bush excessively worn D bush (5.3.4 (a) (i))

Offside Rear Anti-roll bar pin or bush excessively worn D bush (5.3.4 (a) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i))

Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Battery insecure but not likely to fall from carrier Both batterys (4.13 (a) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Offside Battery insecure and likely to fall from carrier (4.13 (a) (ii))

Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Oil leak ()

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Tyre worn close to the legal limit tyre worn on inside edge (4.1.E.1)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced chassis (2.4.G.1)

Nearside Inner Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)

Nearside Rear Anti-roll bar has excessive play in a pin/bush anti roll bar bushes (2.4.G.2)

Offside Front Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced chassis (2.4.G.1)

Rear fog lamp not working (1.3.2b)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Tyre worn close to the legal limit tyre worn on inside edge (4.1.E.1)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

n/s/f inner sill slightly corroded

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

n/s/f inner sill slightly corroded

water leak from lpg evaporator valve

Offside Rear fog lamp not working (1.3.2b) DANGEROUS

water leak from lpg evaporator valve

leak at top hose

rear crossmember/chassis rotten

running on lpg at time of test

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside front brake binding (3.7.B.1)

Offside Rear fog lamp not working (1.3.2b)

Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS

leak at top hose

rear crossmember/chassis rotten

running on lpg at time of test

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Fuel pipe/s corroded

Nail in offside rear tyre

Oil leak

front numberplate screws loose

rear wiper system u/s

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside front brake binding (3.7.B.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear fog lamp not working (1.3.2b)

Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Fuel pipe/s corroded

Nail in offside rear tyre

Oil leak

front numberplate screws loose

rear wiper system u/s

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Nearside Registration plate lamp not working (1.1.5c)

Offside Rear fog lamp not working (1.3.2b)

Offside Registration plate lamp not working (1.1.5c)

Offside Windscreen wiper blade insecure (8.2.2)

Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

slight water leak at gas evaporator (under nearside front seat)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Front Brake pad(s) wearing thin (3.5.1g)

rear wiper fouling cycle carrier

wear in propshaft front u/j

Exhaust has part of the system slightly deteriorated (7.1.1a)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front position lamp(s) incorrect colour (1.1.A.3e)

Offside Front position lamp(s) incorrect colour (1.1.A.3e)

Offside Rear fog lamp insecure (1.3.2a)

rear wiper fouling cycle carrier

wear in propshaft front u/j

Auxiliary belt perished

Child seat fitted not allowing full inspection of adult belt

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front wiper blades smearing

Oil leak

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1b)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Rear brake disc slightly pitted (3.5.1h)

Rear fog lamp switch not marked

Rear wiper blade not clearing

Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)