MOT Status
ExpiredMileage
108,543 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Battery insecure and likely to fall from carrier (4.13 (a) (ii))
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))
Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))
General corrosion - Front and rear
Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn Both front bushes (5.1.2 (b) (i))
Rear Brake hose has slight corrosion to ferrule Both sides (1.1.12 (f) (i))
Rear Sub-frame corroded but not seriously weakened Axle (5.3.3 (b) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive axle (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords 175/65/14 (5.2.3 (d) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Tyre slightly damaged/cracking or perishing Also worn on edge and close to legal limit. (5.2.3 (d) (ii))
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Tyre slightly damaged/cracking or perishing Also worn on edge and close to legal limit (5.2.3 (d) (ii))
Nearside Rear Coil spring incorrectly mounted
Central Rear Brake pipe excessively corroded Of nearside front to rear (1.1.11 (c))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Front Valve stem seriously damaged (5.2.3 (j)) DANGEROUS
Nearside Rear Valve stem seriously damaged (5.2.3 (j)) DANGEROUS
Central Rear Brake pipe corroded, covered in grease or other material Of offside front to rear (1.1.11 (c))
Nearside Rear Coil spring incorrectly mounted
Offside Rear Inner Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Cambelt due??
Nearside Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Drive shaft joint constant velocity boot severely deteriorated Both front (6.1.7 (g) (i))
Nearside Rear Tyre fouling a part of the vehicle (5.2.3 (f))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Drive shaft joint constant velocity boot severely deteriorated Both front (6.1.7 (g) (i))
Cambelt due??
Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt cracking (2.5.C.1a)
Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt cracking (2.5.C.1a)
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement axle (2.4.G.2)
Offside Front Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement axle (2.4.G.2)
Nearside Front Front suspension has slight play in a track control arm inner bush (2.5.B.2b)
Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Front suspension has slight play in a track control arm inner bush (2.5.B.2b)
Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Rear Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Stop lamp not working (1.2.1b)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda Demio?
Based on 136,409 MOT tests across 10,090 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
S484 HBW is a 1998 Mazda Demio in Silver with a 1,300cc petrol engine. This vehicle has been through 28 MOT tests with a personal pass rate of 67.9%.
Across all 1998 Mazda Demio models, the average MOT pass rate is 70.4% with a typical mileage of 75,116 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Demio fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 7,070 recorded failures. If you're considering buying S484 HBW, it's worth having these areas checked by a mechanic before committing.
The Mazda Demio typically stays on UK roads for around 28 years. At 28 years old, this Mazda Demio is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of S484 HBW?
You can check the full history of S484 HBW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was S484 HBW registered?
S484 HBW is a 1998 Mazda Demio, first registered on 12 October 1998.
Is S484 HBW safe to buy?
The MOT history for S484 HBW shows 28 tests with a 67.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does S484 HBW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on S484 HBW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.