MOT Status
ExpiredMileage
96,152 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust has a minor leak of exhaust gases (7.1.2)
Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Parking brake lever has little reserve travel (3.1.6b)
Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
coil spring corroded (2.4.C.1b)
coil spring corroded (2.4.C.1b)
Exhaust has a minor leak of exhaust gases (7.1.2)
Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Parking brake lever has little reserve travel (3.1.6b)
Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
coil spring corroded (2.4.C.1b)
coil spring corroded (2.4.C.1b)
Body has slight corrosion (6.1.B.2)
Nearside engine mounting deteriorated, but not resulting in excessive movement (6.1.D.1a)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
under body very rusted
Service brake: efficiency below requirements (3.7.B.7)
under body very rusted
Brakes imbalanced across an axle (3.7.B.5b)
Horn not working (1.6.2a)
Service brake: efficiency below requirements (3.7.B.7)
Windscreen washer provides insufficient washer liquid (8.2.3)
front brake application uneven (3.7.B.2)
under body very rusted
Front Seat belt anchorage prescribed area is distorted but not considered excessive (5.2.6)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
all coil springs corroded
front brake discs corroded
Brake pipe excessively corroded (3.6.B.2c)
Brake pipe excessively corroded (3.6.B.2c)
Brake pipe excessively corroded (3.6.B.2c)
Brake pipe excessively corroded (3.6.B.2c)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Service brake: efficiency below requirements (3.7.B.7)
Front Seat belt anchorage prescribed area is distorted but not considered excessive (5.2.6)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
all coil springs corroded
front brake discs corroded
Brake hose has slight corrosion to ferrules (3.6.B.4e)
Brake pipe slightly corroded (3.6.B.2c)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
both front outer cv gaiters have started to perish
Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear Shock absorber has a light misting of oil (2.7.3)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front front brake juddering slightly (3.7.A.2b)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front front brake juddering slightly (3.7.A.2b)
Offside Rear Shock absorber has a light misting of oil (2.7.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Direction indicator incorrect colour (1.4.A.2f)
Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Direction indicator incorrect colour (1.4.A.2f)
Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front Mechanical brake component has restricted free movement (3.5.1k) DANGEROUS
Offside Inner Front brake disc excessively pitted (3.5.1h) DANGEROUS
Could not test offside front wheel bearing for roughness due to brake binding.
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
How Reliable is the Hyundai Atoz?
Based on 53,480 MOT tests across 4,936 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
S485 UTU is a 1998 Hyundai Atoz in Blue with a 999cc petrol engine. This vehicle has been through 15 MOT tests with a personal pass rate of 60%.
Across all 1998 Hyundai Atoz models, the average MOT pass rate is 65.7% with a typical mileage of 57,586 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Hyundai Atoz fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 4,886 recorded failures. If you're considering buying S485 UTU, it's worth having these areas checked by a mechanic before committing.
The Hyundai Atoz typically stays on UK roads for around 28 years. At 28 years old, this Hyundai Atoz is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of S485 UTU?
You can check the full history of S485 UTU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was S485 UTU registered?
S485 UTU is a 1998 Hyundai Atoz, first registered on 2 October 1998.
Is S485 UTU safe to buy?
The MOT history for S485 UTU shows 15 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does S485 UTU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on S485 UTU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.