2010 Mazda Bongo

Nearside Front Shock absorbers has slight external damage to the casing (5.3.2 (b))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Front Shock absorbers has slight external damage to the casing (5.3.2 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear slight corrosion to subframe and suspension componets

Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill hold (6.2.2 (d) (i))

Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Offside Front Outer Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill hold (6.2.2 (d) (i))

Nearside Front Shock absorbers has slight external damage to the casing (5.3.2 (b))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Front Shock absorbers has slight external damage to the casing (5.3.2 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear slight corrosion to subframe and suspension componets

Front Anti-roll bar pin or bush worn but not resulting in excessive movement "D" Bushes (5.3.4 (a) (i))

Nearside Front Direction indicator slightly discoloured (4.4.3 (a))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Play in steering rack inner joint(s) ()

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive borderline (8.4.1 (a) (i))

Towbar component corroded, but not excessively borderline (6.1.6 (a))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust has a major leak of exhaust gases flexi, exhaust in very poor condition throughout (6.1.2 (a))

Headlamp light source and lamp not compatible (4.1.4 (c))

Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength and outer sill (5.3.6 (a) (i))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement "D" Bushes (5.3.4 (a) (i))

Nearside Front Direction indicator slightly discoloured (4.4.3 (a))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Play in steering rack inner joint(s) ()

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive borderline (8.4.1 (a) (i))

Towbar component corroded, but not excessively borderline (6.1.6 (a))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Central Exhaust mounting defective (6.1.2 (a))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Central Exhaust mounting defective (6.1.2 (a))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Exhaust system corroded

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis outrigger (5.3.6 (a) (ii)) DANGEROUS

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Exhaust system corroded

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Headlamp aim too high (4.1.2 (a))

Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Brake pedal has insufficient reserve movement (3.3.A.5)

Nearside front brake binding (3.7.B.1)

Offside Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Tyre fouling a part of the vehicle (4.1.D.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded wheel arch (2.4.A.3)

Offside Rear fog lamp emits a light other than red (1.3.2e)

front brake application uneven (3.7.B.2)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

service brake efficiency requirement only just met

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

all 4 tyres perished and worn on edges

Offside Front position lamp(s) not working (1.1.A.3b)