MOT Status
ExpiredMileage
235,058 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brakes imbalanced across an axle (3.7.B.5b)
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Centre Exhaust system not adequately supported (7.1.1)
Driver's door cannot be opened from inside the vehicle (6.2.B.1b)
Fuel system component leaking (7.2.3)
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)
Nearside rear brake recording little or no effort (3.7.B.5a)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Brake hose excessively deteriorated (3.6.B.4d)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front front brake excessively fluctuating (3.7.B.3)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Rear Shock absorber has a serious fluid leak (2.7.3)
Offside Rear position lamp(s) excessively damaged so that it is not visible from a reasonable distance (1.1.A.3d)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside rear brake recording little or no effort (3.7.B.5a)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Windscreen washer provides insufficient washer liquid (8.2.3)
Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp aim too high (1.8)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.C.1b)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Rear Brake cable has wires broken but is not significantly weakened (3.5.1b)
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear Brake cable has wires broken but is not significantly weakened (3.5.1b)
Exhaust tailpipe not capable of allowing the emission probe to be inserted (7.4.B.1)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Service brake: efficiency below requirements (3.7.B.7) DANGEROUS
Offside Front Tyre worn close to the legal limit (4.1.E.1)
nsr tyre has a cut-- cordage not exposed
rear cross member corroded-- no tow bar fitted
Brake pipe slightly corroded (3.6.B.2c)
Inner Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Steering column universal joint has slight play (2.1.5)
Vehicle structure has slight corrosion (6.1.A.1)
Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Headlamp aim too low (1.8)
Offside Headlamp not working on main beam (1.7.5a)
Offside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)
Rear Brake load sensing valve linkage seized (3.6.E.3)
Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Steering column top bearing slightly worn (2.1.2c)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear brake disc slightly pitted (3.5.1h)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
advise surface corrosion on rear chassie
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Rear Brake pipe slightly corroded (3.6.B.2c)
Centre Exhaust mounting missing (7.1.1b)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Rear Brake pipe slightly corroded (3.6.B.2c)
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
S503 KOD is a 1998 Mercedes-benz Vito in Yellow with a 2,299cc diesel engine. This vehicle has been through 14 MOT tests with a personal pass rate of 57.1%.
Across all 1998 Mercedes-benz Vito models, the average MOT pass rate is 61.4% with a typical mileage of 123,856 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying S503 KOD, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 28 years old, this Mercedes-benz Vito is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of S503 KOD?
You can check the full history of S503 KOD by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was S503 KOD registered?
S503 KOD is a 1998 Mercedes-benz Vito, first registered on 10 September 1998.
Is S503 KOD safe to buy?
The MOT history for S503 KOD shows 14 tests with a 57.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does S503 KOD have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on S503 KOD. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.