1998 Subaru Impreza

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Headlamp aim too high (4.1.2 (a))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Offside Front Lower Anti-roll bar linkage pin or bush likely to become detached (5.3.4 (a) (ii)) DANGEROUS

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Body has slight corrosion under (6.1.B.2)

Exhaust system corroding

Nearside Rear Inner Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Inner Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Suspension components corroding

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive inner wing (2.4.A.3)

Nearside Rear Body has slight corrosion inner wing (6.1.B.2)

Nearside Rear tyre perished

Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement 'd' bushes (2.4.G.2)

Rear axle mounting bushed deteriorated

Rear corrosion evident across rear of the vehicle underneath

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Windscreen wiper blade insecure (8.2.2)

Offside Front Subframe mounting prescribed area is excessively corroded floor (2.4.A.3)

Offside Front Suspension arm corroded and seriously weakened wishbone (2.4.G.1)

Offside Front Upper Suspension spring mounting prescribed area is excessively corroded inner wing/turret (2.4.A.3)

Offside Windscreen wiper blade insecure (8.2.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

Windscreen wiper not operating automatically when switched on (8.2.1b)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive inner wing (2.4.A.3)

Nearside Rear Body has slight corrosion inner wing (6.1.B.2)

Nearside Rear tyre perished

Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement 'd' bushes (2.4.G.2)

Rear axle mounting bushed deteriorated

Rear corrosion evident across rear of the vehicle underneath

Underbody and suspension components slightly corroded

underside of vehicle heavily corroded

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Battery insecure (1.9.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Parking brake: efficiency below requirements (3.7.C.1b)

Windscreen washer provides insufficient washer liquid (8.2.3)

underside of vehicle heavily corroded

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

all suspension and hub components have heavy surface rust

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake lever has little reserve travel (3.1.6b)

all suspension and hub components have heavy surface rust

Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust has part of the system slightly deteriorated (7.1.1a)

all brake back plates heavily corroded and braking up

all suspension component have heavy surface corrosion

Nearside Front Brake hose ferrule excessively corroded (3.6.B.4e)

Nearside Front Coil spring mounting corroded and seriously weakened (2.4.C.3c)

Nearside Front Mechanical brake component has restricted free movement (3.5.1k)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Coil spring mounting corroded and seriously weakened (2.4.C.3c)

Nearside Rear Mechanical brake component has restricted free movement (3.5.1k)

Offside Front Brake hose ferrule excessively corroded (3.6.B.4e)

Offside Front Mechanical brake component has restricted free movement (3.5.1k)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Coil spring mounting corroded and seriously weakened (2.4.C.3c)

Offside Rear Mechanical brake component has restricted free movement (3.5.1k)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

all suspension components rusted

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Parking brake lever has little reserve travel (3.1.6b)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

all suspension and brake parts are cvered in surface corosion

Front Front position lamp(s) not working (1.1.A.3b)

Registration plate lamp not working (1.1.C.1d)

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Parking brake lever has little reserve travel (3.1.6b)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

all suspension and brake parts are cvered in surface corosion

Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front Upper Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

o/s n/s rear brake back plates corroded

o/s rear tyre side/wall cut

Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front Upper Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Windscreen wiper blade insecure (8.2.2)

Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

o/s n/s rear brake back plates corroded

o/s rear tyre side/wall cut

Brakes imbalanced across an axle (3.7.B.5b)

Offside Front Shock absorber casing corroded externally so the unit does not function (2.7.2a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Registration plate lamp not working (1.1.5c)