MOT Status
ExpiredMileage
151,174 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Front wheel bearing has excessive play (2.5.A.3c)
Rear Registration plate lamp not working (1.1.C.1d)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Underside of vehicle is quite rusty.
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Underside of vehicle is quite rusty.
Both front outer wheel arches are rusty.
Both rear inner wheel arches are getting slightly corroded.
Brake load sensing valve stiff (3.6.E.3)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside rear floor as hole init inside rear of van.
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside inner sill has a hole init outside perscribed areas.
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear crossmember starting to get rusty
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Track rod end ball joint has excessive play (2.2.B.1f)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Subframe mounting prescribed area is inadequately repaired (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake: efficiency below requirements (3.7.B.7)
Both front outer wheel arches are rusty.
Both rear inner wheel arches are getting slightly corroded.
Brake load sensing valve stiff (3.6.E.3)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside rear floor as hole init inside rear of van.
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside inner sill has a hole init outside perscribed areas.
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear crossmember starting to get rusty
corrosion starting to front o/s wing
corrosion starting to o/s/r wheel arch
wear on front brake disc o/s and n/s
Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Shock absorber has a serious fluid leak (2.7.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Front constant velocity joint gaiter split (2.5.C.1a)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Shock absorber has a serious fluid leak (2.7.3)
Offside Rear Registration plate lamp not working (1.1.C.1d)
corrosion starting to o/s/f wing
corrosion starting to o/s/r inner wheel arch
wear on rear brake disc n/s and o/s
Nearside Front Shock absorber has a light misting of oil (2.7.3)
slight corrosion inner wheel arch at rear o/s
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear brake disc slightly pitted (3.5.1h)
corrosion offside rear valance not in perscibed area.
corrosion on offside inner sile not in perscibed area.
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear brake disc slightly pitted (3.5.1h)
corrosion offside rear valance not in perscibed area.
corrosion on nearside outer sile in centre not perscibed area
corrosion on offside inner sile not in perscibed area.
Centre Front Seat belt retracting mechanism defective (5.2.5b)
Nearside Headlamp aim too low (1.8)
Nearside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Nearside Front Ball joint has excessive play (2.2.B.1f)
Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)
Offside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
S539 CFM is a 1998 Mercedes-benz Vito in White with a 2,299cc diesel engine. This vehicle has been through 18 MOT tests with a personal pass rate of 55.6%.
Across all 1998 Mercedes-benz Vito models, the average MOT pass rate is 61.4% with a typical mileage of 123,856 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying S539 CFM, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 28 years old, this Mercedes-benz Vito is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of S539 CFM?
You can check the full history of S539 CFM by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was S539 CFM registered?
S539 CFM is a 1998 Mercedes-benz Vito, first registered on 1 August 1998.
Is S539 CFM safe to buy?
The MOT history for S539 CFM shows 18 tests with a 55.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does S539 CFM have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on S539 CFM. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.