1998 Yamaha XVS650

Exhaust noisy (8.1.1 (a))

Front Position lamp incorrect colour (4.2.3 (a) (i))

Front no mudguard fitted

Passenger seat(s) missing at time of test ()

Rear Brake component slightly loose rear brake torque arm mounting bolt does not protrude through nyloc nut (1.1.21 (c))

Rear Brake lining(s) close to minimum limit (1.1.13 (a))

Rear Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Rear no mudguard fitted

Exhaust noisy (8.1.1 (a))

Front Position lamp incorrect colour (4.2.3 (a) (i))

Front no mudguard fitted

Passenger seat(s) missing at time of test ()

Rear Brake component slightly loose rear brake torque arm mounting bolt does not protrude through nyloc nut (1.1.21 (c))

Rear Brake lining(s) close to minimum limit (1.1.13 (a))

Rear Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Rear no mudguard fitted

Rear Stop lamp remains on when the brakes are released (4.3.2 (a) (iii))

FRONT/REAR MUDGUARDS NOT FITTED

FRONT/REAR MUDGUARDS NOT FITTED

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Headlamp not working on main beam (4.1.1 (a) (ii))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Nearside Rear Direction indicator with a multiple light source more than 1/2 not functioning (4.4.1 (a) (ii))

Rear reflector missing (4.8.2 (a) (ii))

Throttle operating incorrectly sticking on offside lock (6.2.7 (a) (i))

Nearside Front Direction indicator with a multiple light source up to 1/2 not functioning (4.4.1 (a) (i))

no mudguards fitted

registration plate held on with velcro

Exhaust has a minor leak of exhaust gases rear cylinder manifold (6.1.2 (a))

Exhaust noisy (8.1.1 (a))

Exhaust has a minor leak of exhaust gases rear cylinder manifold (6.1.2 (a))

Exhaust noisy (8.1.1 (a))

Rear reflector missing (4.8.2 (a) (ii))

Registration plate does not conform to the specified requirements (0.1 (d))

Exhaust noisy (8.1.1 (a))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Tyre worn close to the legal limit (5.2.3 (e))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Exhaust noisy (8.1.1 (a))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Stop lamp not working (4.3.1 (a) (ii))

Front Tyre worn close to the legal limit (5.2.3 (e))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Exhaust noisy (7.1.2)

Front Tyre worn close to the legal limit (4.1.3(ii))

Exhaust noisy (7.1.2)

Front mudguard missing

Rear mudguard missing

Exhaust noisy (7.1.2)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Lower Motorcycle structure slightly corroded (6.1.1a)

Lower Rear suspension component slightly corroded. (2.4.A.1a)

no rear footrests fitted at the time of test single seat

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear suspension component slightly corroded. (2.4.A.1a)

Steering headbearing has slight free play (2.2.2)

no rear footpegs single seat

Front Brake disc(s) cracked (3.2.A1g)

Throttle operating incorrectly (6.2.1f)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear suspension component slightly corroded. (2.4.A.1a)

Steering headbearing has slight free play (2.2.2)

no rear footpegs single seat

Inner Front Upper Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Outer Rear Lower Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort (3.3.A1c)

Nearside Front Lower Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.2a(i))