1999 Honda Civic

Front Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))

Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security both wheel arches (6.2.2 (d) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Sub-frame corroded but not seriously weakened front and rear (5.3.3 (b) (i))

Subframe mounting prescribed area is corroded but not considered excessive front and rear (5.3.6 (a) (i))

Front Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security both wheel arches (6.2.2 (d) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Sub-frame corroded but not seriously weakened front and rear (5.3.3 (b) (i))

Subframe mounting prescribed area is corroded but not considered excessive front and rear (5.3.6 (a) (i))

Front Side repeater slightly discoloured both (4.4.3 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Bumper insecure (6.1.4 (a) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Nearside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive subframe (5.3.6 (a) (i))

Nearside Front Side repeater slightly discoloured (4.4.3 (a))

Offside Front Side repeater slightly discoloured (4.4.3 (a))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Body has slight corrosion prescribed areas (6.1.B.2)

Front Suspension arm worn but not seriously weakened both (2.4.G.1)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

front and rear sils corroded

Offside Rear position lamp(s) not working (1.1.A.3b)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

front and rear sils corroded

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Shock absorber has a slightly worn bush (2.7.4)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Shock absorber has a slightly worn bush (2.7.4)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

nearside rear tyre perished

offside rear tyre perished

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Shock absorber has a slightly worn bush (2.7.4)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Shock absorber has a slightly worn bush (2.7.4)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

nearside rear tyre perished

offside rear tyre perished

Offside Front Anti-roll bar insecure (2.4.G.1)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

slight corrosion on front floors

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Offside Rear fog lamp not working (1.3.2b)

Coolant leak

Oil leak

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too low (1.8)