MOT Status
ExpiredMileage
91,197 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Inner Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Outer Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Inner Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Outer Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Parking brake lever has little reserve travel (3.1.6b)
catalytic convertor deteriorated
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Offside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Parking brake lever has little reserve travel (3.1.6b)
catalytic convertor deteriorated
centre exhaust rear flange deteriorated
emission results MAY be affected by exhaust condition
exhaust system deteriorated
Direction indicators incorrect colour (1.4.A.2f)
Nearside Rear Lower Radius arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Lower Radius arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Service brake: efficiency below requirements (3.7.B.7)
rear brake application uneven (3.7.B.2)
rear brakes release unevenly (3.7.B.4)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
exhaust system deteriorated
o/s rear brake slight bind
Centre Brake pipe slightly corroded (3.6.B.2c)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Front Brake pipe slightly corroded (3.6.B.2c)
Fuel pipe/s corroded
Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear position lamp(s) not working (1.1.A.3b)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
front and rear brake discs worn and pitted
Centre Brake pipe slightly corroded (3.6.B.2c)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Front Brake pipe slightly corroded (3.6.B.2c)
Fuel pipe/s corroded
Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
front and rear brake discs worn and pitted
Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Offside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)
Nearside Brake pipe excessively corroded (3.6.B.2c) DANGEROUS
Offside Brake pipe excessively corroded (3.6.B.2c) DANGEROUS
Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Shock absorber has a light misting of oil (2.7.3)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
front brakes slightly uneven when operated
Centre Brake pipe slightly corroded (3.6.B.2c)
Front Exhaust has part of the system slightly deteriorated (7.1.1a)
Fuel pipe/s corroded
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear brake disc slightly pitted (3.5.1h)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Rear rear brake binding (3.7.B.1)
Nearside Rear rear brake recording little or no effort (3.7.B.5a)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Centre Brake pipe slightly corroded (3.6.B.2c)
Front Exhaust has part of the system slightly deteriorated (7.1.1a)
Fuel pipe/s corroded
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear brake disc slightly pitted (3.5.1h)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
front tyres worn low
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.2b)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.2b)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
How Reliable is the Rover 420?
Based on 369,436 MOT tests across 59,332 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
S591 HEC is a 1998 Rover 420 in Blue with a 1,994cc petrol engine. This vehicle has been through 16 MOT tests with a personal pass rate of 56.3%.
Across all 1998 Rover 420 models, the average MOT pass rate is 62.6% with a typical mileage of 99,006 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Rover 420 fails its MOT is constant velocity joint gaiter split, accounting for 35,342 recorded failures. If you're considering buying S591 HEC, it's worth having these areas checked by a mechanic before committing.
The Rover 420 typically stays on UK roads for around 33 years. At 28 years old, this Rover 420 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of S591 HEC?
You can check the full history of S591 HEC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was S591 HEC registered?
S591 HEC is a 1998 Rover 420, first registered on 1 August 1998.
Is S591 HEC safe to buy?
The MOT history for S591 HEC shows 16 tests with a 56.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does S591 HEC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on S591 HEC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.