2006 Lexus IS250

Electronic stability control warning lamp indicates a fault (7.12 (e))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Front Road wheel fixing missing (5.2.1 (a) (i))

Offside Rear Road wheel fixing missing (5.2.1 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge ON INNER EDGE 225/35/19 (5.2.3 (e))

Rear Sub-frame corroded but not seriously weakened ALSO VARIOUS SUROUNDING COMPONANTS (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

TRAYS/COVERS OBSCURING VARIOUS TESTABLE ITEMS

Front Brakes imbalanced across an axle o/s brake is lower by 34% (1.2.1 (b) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Brake pedal has insufficient reserve travel hand brake (1.1.2 (a))

Front Driver's view of an obligatory external mirror significantly affected by an obstruction air fresheners (3.1 (a) (ii))

Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Brake pipe excessively corroded to flexi hose (1.1.11 (c))

Offside Front Brake pipe excessively corroded 2 front to rears by union at the front (1.1.11 (c))

Offside Front Brake pipe excessively corroded to flexi hose (1.1.11 (c))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Offside Front Outer Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Headlamp not working on dipped beam (1.7.5a)

Nearside front brake excessively fluctuating (3.7.B.3)

Offside front brake fluctuating, but not excessively (3.7.B.3)

Parking brake lever has little reserve travel (3.1.6b)

Engine covers fitted obscuring some components in the engine bay

Nail in nearside rear tyre

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Under-trays fitted obscuring some underside components

n/s/r tread slightly cracking

Nearside Headlamp aim too high (1.8)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Headlamp aim too high (1.8)

Engine covers fitted obscuring some components in the engine bay

Nail in nearside rear tyre

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Under-trays fitted obscuring some underside components

n/s/r tread slightly cracking