MOT Status
ValidMileage
175,837 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))
Windscreen washer not working (3.5 (a))
Exhaust has a minor leak of exhaust gases Rear Silencer (6.1.2 (a))
Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Both headlights faded.
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Inner Sill corroded/holed.
Nearside Rear Cross member above rear exhaust corroded/holed.
Nearside Rear Inner Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Offside Inner Sill corroded/holed.
Offside Rear Cross member/bumper support corroded/holed.
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Both headlights faded.
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Inner Sill corroded/holed.
Nearside Rear Cross member above rear exhaust corroded/holed.
Nearside Rear Inner Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Offside Inner Sill corroded/holed.
Offside Rear Cross member/bumper support corroded/holed.
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Central Inner Integral body structure is deformed and structural rigidity is significantly reduced seal hole (6.1.1 (a) (i))
Nearside Rear Inner Integral body structure is deformed and structural rigidity is significantly reduced seal hole by exhaust (6.1.1 (a) (i))
Offside Front Inner Integral body structure is deformed and structural rigidity is significantly reduced seal (6.1.1 (a) (i))
Offside Front Inner Integral body structure is deformed and structural rigidity is significantly reduced seal in center (6.1.1 (a) (i))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Service brake excessively binding (1.2.1 (f))
Offside Rear Inner Integral body structure is deformed and structural rigidity is significantly reduced seal (6.1.1 (a) (i))
Front Windscreen washer not working (3.5 (a))
Nearside Rear Inner Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Upper jacking points
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Upper bump stop missing
Rear Service brake binding but not excessively (1.2.1 (f))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Nearside Rear Axle bump stop missing
Nearside Rear Outer Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Upper Axle bump stop missing
Offside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Axle bump stop missing
Nearside Rear Outer Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Upper Axle bump stop missing
Offside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))
Offside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Exhaust has a major leak of exhaust gases flexi section (6.1.2 (a))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))
Offside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm bushes (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm bushes (5.3.4 (a) (i))
Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm bushes (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm bushes (5.3.4 (a) (i))
Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
both front inner sills rusted/holed in non prescribed area.
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust emissions likely to be affected by an exhaust leak rear box (8.2.1.1 (b))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Rear fog lamp does not emit a steady red light (4.5.4 (a))
Offside Rear anti-roll bar bush worn.
both front inner sills rusted/holed in non prescribed area.
corrosion started to n/s/f o/s/f inner sills
rattle from cat
tyres front 195/70/15 rear tyres 215/65/15
rear tyres are 215/65/15 front tyres are 195/70/15
rear tyres started to perish
all 4 tyres perishing and cracking in tread 195/70/15
How Reliable is the Ford Freda?
Based on 28,175 MOT tests across 1,491 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
S616 JAH is a 1998 Ford Freda in White with a 2,000cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 61.1%.
Across all 1998 Ford Freda models, the average MOT pass rate is 69.1% with a typical mileage of 143,965 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Freda fails its MOT is fog lamp not working, accounting for 879 recorded failures. If you're considering buying S616 JAH, it's worth having these areas checked by a mechanic before committing.
The Ford Freda typically stays on UK roads for around 31 years. At 28 years old, this Ford Freda is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of S616 JAH?
You can check the full history of S616 JAH by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was S616 JAH registered?
S616 JAH is a 1998 Ford Freda, first registered on 31 December 1998.
Is S616 JAH safe to buy?
The MOT history for S616 JAH shows 18 tests with a 61.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does S616 JAH have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on S616 JAH. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.