2011 Mazda Bongo

Emissions unable to be completed (8.2.1.2 (d))

Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner arch heavily corroded (6.1.1 (c) (i))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill (6.1.1 (c) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill heavily corroded x3 points (6.1.1 (c) (i))

Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill heavily corroded x2 points (6.1.1 (c) (i))

Offside Integral body structure is deformed and structural rigidity is significantly reduced Outer sill at centre point (6.1.1 (a) (i))

Offside Rear Integral body structure inadequately repaired such that structural rigidity is significantly reduced Inner arch not welded to body (6.1.1 (d) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Driver's seat insecure (6.2.5 (a) (ii)) DANGEROUS

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement Upper arm front bush (5.3.4 (a) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement Upper arm front bush (5.3.4 (a) (i))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Service brake lagging in operation (1.2.1 (d))

Nearside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength Sill (5.3.6 (a) (i))

Offside Front Service brake excessively fluctuating (1.2.1 (e))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Rear fog lamp switch inoperative (4.5.3 (a))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Rear rear seat belts cant be tested as belts restricted

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Nearside Battery insecure and likely to fall from carrier (4.13 (a) (ii))

Nearside Rear Bumper insecure (6.1.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill central (5.3.6 (a) (i))

Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill central (5.3.6 (a) (i))

Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Rear fog lamp not working (4.5.1 (a) (ii))

rear seat belts cant be tested as belts restricted

Nearside Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Nearside Outer Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Outer Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))

Nearside Front Service brake excessively fluctuating (1.2.1 (e))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Front Service brake lagging in operation (1.2.1 (d))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill at front (5.3.6 (a) (i))

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill at rear (5.3.6 (a) (i))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill at front (5.3.6 (a) (i))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill centre to rear (5.3.6 (a) (i))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill at rear (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Parking (secondary brake) on a single line braking system has no recorded effort at a wheel (1.3.1 (a) (ii)) DANGEROUS

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Battery insecure and likely to fall from carrier (4.13 (a) (ii))

Offside Headlamp aim too high (4.1.2 (a))

Offside Position lamp not working (4.2.1 (a))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front insecure

Horn not working (1.6.2a)

Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Front Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Parking brake lever has no reserve travel (3.1.6b)

Rear fog lamp not working (1.3.2b)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Emissions not tested due to exhaust leak (7.3.A.1)

Exhaust has a major leak of exhaust gases flexi joint (7.1.2)

Front Brakes imbalanced across an axle (3.7.B.5b)

Horn not working (1.6.2a)

Nearside Front Direction indicator insecure (1.4.A.2b)

Nearside Front Electrical wiring damaged and bare wires exposed (1.9.2c)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Rear position lamp(s) excessively damaged so that it is not visible from a reasonable distance lamp broken (1.1.A.3d)

Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front front brake binding (3.7.B.1)

Rear fog lamp not working (1.3.2b)

N/S/F tyre wearing on outer edge.

Nearside Front Lower Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Service brake: efficiency below requirements (3.7.B.7)