MOT Status
ValidMileage
111,315 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cill (6.1.1 (c) (i))
Nearside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cill (6.1.1 (c) (i))
Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Brake disc worn, but not excessively (1.1.14 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
excessive welding and fabrication to under side
excessive welding and fabrication to under side
heavily repaired undeneath welding
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outrigger (6.1.1 (c) (i))
Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Middle sill (6.1.1 (c) (i))
Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i))
Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outrigger behind bumper skin (6.1.1 (c) (i))
Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced x member ==rear 1/4 x2 (6.1.1 (c) (i))
Power steering pipe/hose has slight seepage (2.1.5 (a))
Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member (6.1.1 (c) (i))
Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Power steering pipe/hose has slight seepage (2.1.5 (a))
Nearside Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting undersill (6.2.2 (d) (i))
Nearside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))
Offside Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting undersill (6.2.2 (d) (i))
Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting under arch (6.2.2 (d) (i))
Nearside Front driveshaft seal leaking
Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front driveshaft seal leaking
Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
engine coolant leak
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sill (2.4.A.3)
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Nearside front brake binding (3.7.B.1)
Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sill (2.4.A.3)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
o/s n/s chassis showing signs of corrosion
o/s n/s front brake discs slightly worn
rear chassis cross member showing signs of corrosion
Exhaust has a minor leak of exhaust gases (7.1.2)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside and nearside rear wheel arches started to corrode.
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1b)
Nearside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Offside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Exhaust has a minor leak of exhaust gases (7.1.2)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside and nearside rear wheel arches started to corrode.
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1b)
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Offside Rear Stop lamp not working (1.2.1b)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Nearside Front brake disc excessively pitted (3.5.1h)
Offside Front brake disc excessively pitted (3.5.1h)
Offside Outer Front Front constant velocity joint gaiter split (2.5.C.1a)
Offside Rear Rear fog lamp not working (1.3.2b)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear fog lamp not working (1.3.2b)
Offside Registration plate lamp not working (1.1.5c)
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
S752 VWE is a 1998 Mazda Bongo in Silver with a 2,500cc diesel engine. This vehicle has been through 32 MOT tests with a personal pass rate of 59.4%.
Across all 1998 Mazda Bongo models, the average MOT pass rate is 67.1% with a typical mileage of 125,789 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying S752 VWE, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 28 years old, this Mazda Bongo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of S752 VWE?
You can check the full history of S752 VWE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was S752 VWE registered?
S752 VWE is a 1998 Mazda Bongo, first registered on 31 December 1998.
Is S752 VWE safe to buy?
The MOT history for S752 VWE shows 32 tests with a 59.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does S752 VWE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on S752 VWE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.