1998 Renault Master

Nearside Front Upper Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Vehicle structure has slight corrosion (6.1.B.2)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Vehicle structure has slight corrosion (6.1.B.2)

Oil leak

Brake pedal anti-slip provision worn smooth (3.3.A.1b)

Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (7.1.4)

Nearside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Front Upper Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Vehicle structure has slight corrosion (6.1.B.2)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Vehicle structure has slight corrosion (6.1.B.2)

Oil leak

Offside Front wheel bearing has slight play (2.5.A.3c)

Emissions not tested (7.0)

Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust tailpipe not capable of allowing the emission probe to be inserted (7.4.B.1)

Nearside Front Upper Suspension arm has excessive play in a pin/bush (2.4.G.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Lower Suspension arm has excessive play in a pin/bush (2.4.G.2)

Offside Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front constant velocity joint is excessively worn (2.5.C.1b)

Offside Headlamp aim too high (1.8)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Rear Exhaust system not adequately supported (7.1.1)

Offside Front wheel bearing has slight play (2.5.A.3c)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nail in offside rear tyre

Oil leak

Brake pedal anti-slip provision missing (3.3.A.1b)

Nearside Front Upper Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Front wheel bearing has excessive play (2.5.A.3c)

Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Exhaust has a minor leak of exhaust gases (7.1.2)

Oil leak

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

corosion holes both front outer sills

wipers split

Nearside Body has a sharp edge caused by damage (6.1.C.1)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

corosion holes both front outer sills

wipers split

Offside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)