1998 Honda CBR1100XX

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

REAR BRAKE EFFORT REQUIRMENTS JUST MET

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Rear Brake effort inadequate at a wheel (1.2.1 (a) (i))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Rear Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort (3.3.A1c)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Rear Roller brake test indicates a severely juddering brake (3.3.A1b)

Front Brake disc(s) slightly pitted (3.2.A1l)

Rear Brake disc(s) slightly pitted (3.2.A1l)

Drive chain slightly loose (6.2.1d)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Drive chain sprocket carrier worn but not considered excessive (6.2.1e)

The front brake will require an overhaul in the near future

Drive chain worn but not considered excessive (6.2.1e)

Front Brake disc(s) slightly pitted (3.2.A1l)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Front Tyre worn close to the legal limit (4.1.3(ii))

Front wheel bearings have slight free play (2.3.5b)

Rear Brake disc(s) slightly pitted (3.2.A1l)

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

Rear Drive chain sprocket slightly worn (6.2.1e)

Steering movement slightly 'notchy' (2.2.1b)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))