1998 Honda CBR600F

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Valve stem slightly damaged (5.2.3 (j))

Rear Brake fluid reservoir fluid level below minimum level (1.1.10 (d) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Clutch lever positioned so it cannot be readily operated (6.2.7 (b))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Valve stem slightly damaged (5.2.3 (j))

Rear Brake fluid reservoir fluid level below minimum level (1.1.10 (d) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Front Shock absorber has a light misting of oil (5.3.2 (b))

Front brake pipe fittings corroded

Rear Drive chain slightly loose (6.1.7 (c) (i))

Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Upper Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear brake pipe fittings corroded

Rear Upper Motorcycle structure slightly corroded (6.1.1a)

Drive chain excessively loose (6.2.1d)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front mudguard missing

Front suspension assembly slightly corroded. (2.3.1)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Wheel alignment slightly misaligned. (2.5.1)

Front Roller brake test indicates a binding brake (3.3.A1a) DANGEROUS

Front mudguard can easily contact the tyre (2.3.7) DANGEROUS

Front mudguard can easily contact the wheel (2.3.7) DANGEROUS

Front mudguard insecure (2.3.7) DANGEROUS

Nearside Front Direction indicators not working (1.5.1c) DANGEROUS

Rear Exhaust mounting does not fully support the exhaust system (7.1.1.c) DANGEROUS

Throttle operating incorrectly (6.2.1f) DANGEROUS

Front Tyre worn close to the legal limit (4.1.3(ii))

Front suspension assembly slightly corroded. (2.3.1)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Wheel alignment slightly misaligned. (2.5.1)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Floor brake test indicates a binding brake (3.3.C2c)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Exhaust noisy (7.1.2)

Fork stanchions starting to rust

Front Tyre worn close to the legal limit (4.1.3(ii))

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Exhaust noisy (7.1.2)

Fork stanchions starting to rust

Front Tyre worn close to the legal limit (4.1.3(ii))

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Front Brake lining(s) close to minimum limit (3.2.A1f(i))