1998 Mazda MX-5

Central Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i))

Offside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Offside Rear Anti-roll bar attachment bracket/mounting insecure and impairing directional stability (5.3.3 (a) (ii)) DANGEROUS

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Sub-frame corroded but not seriously weakened and suspension components (5.3.3 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Integral body structure is corroded but structural rigidity is not significantly reduced wings both sides (6.1.1 (c) (i))

Front Sub-frame corroded but not seriously weakened and suspension components (5.3.3 (b) (i))

Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced wheel arch (6.1.1 (c) (i))

Rear Sub-frame corroded but not seriously weakened and suspension components (5.3.3 (b) (i))

vehicle has general surface corrosion underneath

Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Integral body structure is corroded but structural rigidity is not significantly reduced wings both sides (6.1.1 (c) (i))

Front Sub-frame corroded but not seriously weakened and suspension components (5.3.3 (b) (i))

Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced wheel arch (6.1.1 (c) (i))

Rear Sub-frame corroded but not seriously weakened and suspension components (5.3.3 (b) (i))

vehicle has general surface corrosion underneath

Brake pipe corroded, covered in grease or other material allround (1.1.11 (c))

all suspension components have slight corrosion

both front wings have slight corosion

underside of vehicle has general corrosion

Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i))

Brake pipe corroded, covered in grease or other material allround (1.1.11 (c))

all suspension components have slight corrosion

both front wings have slight corosion

underside of vehicle has general corrosion

Brake pipe corroded, covered in grease or other material allround (1.1.11 (c))

all wheel arches have slight corosion

rear suspension components have slight corosion all over

underneath of vehicle has underseal covering chassis and suspension components

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Brake pipe corroded, covered in grease or other material allround (1.1.11 (c))

all wheel arches have slight corosion

rear suspension components have slight corosion all over

underneath of vehicle has underseal covering chassis and suspension components

Nearside Rear sill arch area corroded

Offside Rear sill/arch area corroded

Rear suspension components corroded

brake pipes greased

Rear tyres worn close to tread wear bars and slightly perished

suspension arms corroded but not holed

both rear outer sills corroded but not holed

suspension arms corroded but no holes

Nearside Front suspension arm corroded

Nearside Rear suspension arm corroded

Offside Front suspension arm corroded

Offside Rear suspension arm corroded

Rear outer sills corroded/not holed at time of test

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill/floor holed (7.1.1 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill/floor holed (7.1.1 (a) (i))

Nearside Front suspension arm corroded

Nearside Rear suspension arm corroded

Offside Front suspension arm corroded

Offside Rear suspension arm corroded

Rear outer sills corroded/not holed at time of test

rear exhaust box deterioted

Nearside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

rear chassis has surface rust to components.

Nearside Front Anti-roll bar linkage fractured (2.4.G.1)

Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Nearside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

rear chassis has surface rust to components.

Emissions not tested (7.0)

Exhaust has part of the system slightly deteriorated (7.1.1a)

n/s/r tyre poor.

o/s/r lenze cracked.

rear brake discs corroded.

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

rear brake discs corroded.

Exhaust has part of the system slightly deteriorated (7.1.1a)

n/s/r tyre poor.

o/s/r lenze cracked.

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)