1998 Mercedes-benz Vito

Centre Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)

Complete underside of vehicle corroded. Needs waxoyl

Nearside Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Towbar component slightly corroded (6.6.1)

Front registration plate deteriorated (6.3.1d)

Nearside Front Headlamp aim too low (1.8)

Nearside Front Steering rack gaiter split (2.2.D.2d)

Nearside Rear Brake hose twisted (3.6.B.4c)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Direction indicator not working (1.4.A.2c)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Centre Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)

Complete underside of vehicle corroded. Needs waxoyl

Nearside Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)

Towbar component slightly corroded (6.6.1)

Brake load sensing valve linkage seized (3.6.E.3)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Outer Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength (2.4.A.3)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Side repeater incorrect colour (1.4.A.2f)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Inner Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Outer Front constant velocity joint gaiter split (2.5.C.1a)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Inner Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

very heavt surface corrosion through out the underside

nearside sill heavily corroded outside of prescribed area

Brakes imbalanced across an axle (3.7.B.5b)

Driver's door cannot be opened from inside the vehicle (6.2.B.1b)

Nearside Front Front constant velocity joint is excessively worn (2.5.C.1b)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Front Front constant velocity joint is excessively worn (2.5.C.1b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Macpherson strut insecure (2.4.G.1)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

rear brake application uneven (3.7.B.2)

nearside sill heavily corroded outside of prescribed area

Offside Inner Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Front passenger door cannot be opened from inside the vehicle (6.2.B.1b)

Fuel system component leaking (7.2.3)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Upper Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Side repeater insecure (1.4.A.2b)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Inner Track rod end ball joint has excessive play (2.2.B.1f)

Offside Outer Front constant velocity joint gaiter split (2.5.C.1a)

Registration plate lamp not working (1.1.5c)

Offside Inner Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Front passenger door cannot be opened from inside the vehicle (6.2.B.1b)

Nearside Rear position lamp(s) excessively damaged so that it is not visible from a reasonable distance (1.1.A.3d)

Offside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Headlamp aim too high (1.8)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

n/s/r & o/s/r shockasorber cover missing

o/s/f mirror cracked

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Brake hose excessively deteriorated (3.6.B.4d)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Brake hose excessively deteriorated (3.6.B.4d)

Nearside Registration plate lamp not working (1.1.5c)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Front Brake hose excessively deteriorated (3.6.B.4d)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp not working on main beam (1.7.5a)

Offside Rear Brake hose excessively deteriorated (3.6.B.4d)

Offside Rear brake disc excessively pitted (3.5.1h)

Rear registration plate deteriorated (6.3.1d)

n/s/r and o/s/r shockasorber covers missing

o/s/ mirror cracked

Driver's door cannot be opened from inside the vehicle (6.2.B.1b)