MOT Status
ExpiredMileage
64,043 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Suspension component mounting prescribed area is excessively corroded Sill. (2.4.A.3)
Nearside Stop lamp not working (1.2.1b)
Rear Suspension component mounting prescribed area is excessively corroded N/s and o/s inner sills. (2.4.A.3)
Front Suspension arm corroded but not seriously weakened Both (2.4.G.1)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Rear Brake pipe slightly corroded Both (3.6.B.2c)
Suspension component mounting prescribed area is corroded but not considered excessive Both front inner wings. (2.4.A.3)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (2.4.A.3)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
both front suspension arms heavily corroded unable to hole
both rear chassis legs corroded unable to hole
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (2.4.A.3)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
both front suspension arms heavily corroded unable to hole
both rear chassis legs corroded unable to hole
Front Brake pad(s) wearing thin (3.5.1g)
hole in inner vallance n/s/r boot floor not near a surporting item
Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Front Brake pad(s) wearing thin (3.5.1g)
hole in inner vallance n/s/r boot floor not near a surporting item
Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
n/s and o/s sills corroded
Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
n/s and o/s sills corroded
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
corrosion on offside rear chassis leg by brake pipe clip above suspension unable to hole at present
hole in nearside rear valance not perscribed area
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
corrosion on offside rear chassis leg by brake pipe clip above suspension unable to hole at present
hole in nearside rear valance not perscribed area
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
off side front wiper worn but cleaning screen
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
front brake pads 70% worn
nearside front tyre worn on inside and small cracks in sidewalls
rear of chassis legs both sides starting to corrode unable to hole at present
Offside Front Tyre has ply or cords exposed (4.1.D.1b)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
front brake pads 70% worn
nearside front tyre worn on inside and small cracks in sidewalls
rear of chassis legs both sides starting to corrode unable to hole at present
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Outer Rear Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Headlamps matched pair are incorrectly positioned (1.7.3)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
advise rear offside brake pipe lightly corroded
advise wear in front nearside tyre
How Reliable is the Nissan Almera?
Based on 2,976,239 MOT tests across 231,560 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
S81 NBW is a 1998 Nissan Almera in Red with a 1,392cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 55%.
Across all 1998 Nissan Almera models, the average MOT pass rate is 67.0% with a typical mileage of 80,168 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Nissan Almera fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 141,538 recorded failures. If you're considering buying S81 NBW, it's worth having these areas checked by a mechanic before committing.
The Nissan Almera typically stays on UK roads for around 30 years. At 28 years old, this Nissan Almera is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of S81 NBW?
You can check the full history of S81 NBW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was S81 NBW registered?
S81 NBW is a 1998 Nissan Almera, first registered on 22 December 1998.
Is S81 NBW safe to buy?
The MOT history for S81 NBW shows 20 tests with a 55% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does S81 NBW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on S81 NBW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.