1998 BMW Z3

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Rear Service brake effort inadequate at a wheel Parking brake very low effort at wheel (1.2.1 (a) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords 225/45/17 (5.2.3 (d) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Tyre has a cut but not deep enough to reach the ply or cords 225/45/17 (5.2.3 (d) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Brake pipe slightly corroded front to rear (3.6.B.2c)

Nearside wiper blade split

Offside Brake pipe slightly corroded front to rear (3.6.B.2c)

Battery insecure (1.9.1)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Rear Sub-frame rubber bush deteriorated resulting in excessive movement axle beam bush (2.4.G.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Rear Sub-frame rubber bush deteriorated resulting in excessive movement axle beam bush (2.4.G.2)

Offside front brake excessively fluctuating (3.7.B.3)

Rear Exhaust system not adequately supported rubber mounting missing (7.1.1)

Windscreen washer provides insufficient washer liquid not working water leaking onto floor (8.2.3)

Exhaust has a minor leak of exhaust gases blowing after cat on joint (7.1.2)

Nearside Brake pipe slightly corroded front to rear (3.6.B.2c)

Offside Brake pipe slightly corroded front to rear (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside wiper blade split

Oil leak ()

front brakes 20% imbalance

handbrake only just met min requirements 17%

all tyres heavily cracked

heavily waxoiled making inspection hard

all tyres heavily cracked

heavy waxoil making inspection hard

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

all tyres heavily cracked

heavy waxoil making inspection hard

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

all tyres cracking

heavy waxoiling making inspection hard

washers omly just working

heavy waxoiling of underbody steering and brake components

nsf wheel has slight play

osf brake has slight bind

all metal brake pipes heavily greased making inspection hard

underbody has heavy waxoiling making inspection hard

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust has part of the system slightly deteriorated (7.1.1a)

all metal brake pipes heavily greased making inspection hard

underbody has heavy waxoiling making inspection hard

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

both front bottom balljoints may begining to show signs of wear

both front to rear brake pipes corroded

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear brake disc excessively pitted (3.5.1h)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

both front bottom balljoints may begining to show signs of wear

both front to rear brake pipes corroded

near side front brake disc corroded on inner and outer face

Nail in offside rear tyre

Offside Front Shock absorber has a light misting of oil (2.7.3)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

emissions fault passed on default only

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Front position lamp(s) not working (1.1.A.3b)

Rear Exhaust mounting missing (7.1.1b)

Nail in offside rear tyre

Offside Front Shock absorber has a light misting of oil (2.7.3)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

emissions fault passed on default only

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust mounting missing (7.1.1b)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Rear coil spring incomplete (2.4.C.1a)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front coil spring incomplete (2.4.C.1a)

Brakes imbalanced across an axle (3.7.B.5b)

Centre Rear Exhaust system not adequately supported (7.1.1)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Offside Rear coil spring fractured (2.4.C.1a)