1998 Seat Inca

Brake pipe slightly corroded front and rear (3.6.B.2c)

Seat belt anchorage prescribed area is corroded but not considered excessive both outer sills and floors (5.2.6)

Suspension arm synthetic bush deteriorated but not resulting in excessive movement front and rear (2.4.G.2)

Anti-roll bar linkage missing both front (2.4.G.1)

Rear Stop lamp not working (1.2.1b)

Seat belt anchorage prescribed area is excessively corroded o/s/f floor holed (5.2.6)

Brake pipe slightly corroded front and rear (3.6.B.2c)

Seat belt anchorage prescribed area is corroded but not considered excessive both outer sills and floors (5.2.6)

Suspension arm synthetic bush deteriorated but not resulting in excessive movement front and rear (2.4.G.2)

Exhaust has a minor leak of exhaust gases (7.1.2)

Front Brake pipe slightly corroded (3.6.B.2c)

Front Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front Brake pipe slightly corroded (3.6.B.2c)

Front Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Exhaust has a minor leak of exhaust gases (7.1.2)

Front Brake pipe slightly corroded (3.6.B.2c)

Front Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Exhaust has a major leak of exhaust gases (7.1.2)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Front Brake pipe slightly corroded (3.6.B.2c)

Front Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Rear Stop lamp not working (1.2.1b)

Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Rear Rear wheel bearing has slight play (2.6.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

oil light faulty

Nearside Brake pipe excessively corroded (3.6.B.2c)

Nearside Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Rear position lamp(s) not working (1.1.A.3b)

Offside Brake pipe excessively corroded (3.6.B.2c)

Offside Brake pipe excessively corroded (3.6.B.2c)

oil light faulty

Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Rear Rear wheel bearing has slight play (2.6.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Nearside Front Brake hose bulging under pressure (3.6.B.3) DANGEROUS

Offside Front Brake hose bulging under pressure (3.6.B.3) DANGEROUS

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pipe slightly corroded (3.6.B.2c)

Both front steel brake pipes rusted amd degrading

Both front suspension arm rear mounting bushes perished and splitting

Both front to rear and both rear steel brake pipes rusted and degrading

Lift in both front suspension leg top mounts

More than normal partking brake lever travel

NOTE: Oil perssure lamp flashing at start of test

Offside rear tyre worn to 2mm on tread sholders and perished

Play in both rear wheel bearings

Rear exhaust section very rusty

Rear tyre load carring ranges mis-matched

Direction indicator incorrect colour (1.4.A.2f)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Outer Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Registration plate lamp not working (1.1.5c)

Nearside Stop lamp not working (1.2.1b)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Both front steel brake pipes rusted amd degrading

Both front suspension arm rear mounting bushes perished and splitting

Both front to rear and both rear steel brake pipes rusted and degrading

Lift in both front suspension leg top mounts

More than normal partking brake lever travel

NOTE: Oil perssure lamp flashing at start of test

Offside rear tyre worn to 2mm on tread sholders and perished

Play in both rear wheel bearings

Rear exhaust section very rusty

Rear tyre load carring ranges mis-matched

Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Mechanical brake component has restricted free movement (3.5.1k)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brake pipe excessively corroded (3.6.B.2c)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Nearside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)