1998 Subaru Forester

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Windscreen washer not working (3.5 (a))

Windscreen washer provides insufficient washer liquid (8.2.3)

brake pedal feels poor

Central Stop lamp has less than 50% of the light sources illuminating (1.2.1b)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Nearside Rear Suspension arm has excessive play in a pin/bush front bush (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Wheel nut(s) missing (4.2.A.1e)

Offside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Registration plate lamp not working (1.1.C.1d)

Rear Brake hose ferrule excessively corroded both (3.6.B.4e)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

brake pedal rubber worn

corrosion on all rear brake pipes

corrosion on rear subframe

n/s wiper smearing slightly

some noise from rear wheel bearings on roadtest

Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (7.1.4)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Upper Brake pipe excessively corroded (3.6.B.2c)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

brake pedal rubber worn

corrosion on all rear brake pipes

corrosion on rear subframe

n/s wiper smearing slightly

some noise from rear wheel bearings on roadtest

Registration plate lamp not working (1.1.C.1d)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear position lamp(s) not working (1.1.A.3b)

Nearside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

auxillary drive belt perishing

brake load valve under bonnet has light misting of fluid

Nearside Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Registration plate lamp not working (1.1.5c)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1b)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1a)

auxillary drive belt perishing

brake load valve under bonnet has light misting of fluid

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Nearside Rear Registration plate lamp not working (1.1.5c)

Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

steering joint dust cover split/missing