MOT Status
ExpiredMileage
151,528 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pipe excessively corroded front to rear x2 (1.1.11 (c))
Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f))
Front Service brake excessively fluctuating (1.2.1 (e))
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Front Brake hose excessively chafed rubbing on drop link (1.1.12 (b) (ii))
Nearside Front Brake pipe excessively corroded (1.1.11 (c))
Nearside Front Direction indicator not working (4.4.1 (a) (ii))
Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))
Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch by brake pipe fixing (6.1.1 (c) (i))
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced jacking point (6.1.1 (c) (i))
Nearside Rear Brake hose excessively chafed rubbing (1.1.12 (b) (ii))
Nearside Rear Other passenger door cannot be opened from outside the vehicle (6.2.3 (a))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Shock absorbers damaged to the extent that it does not function (5.3.2 (b))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced jacking point (6.1.1 (c) (i))
Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassi out riger (6.1.1 (c) (i))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch by front sub frame mount (6.1.1 (c) (i))
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced jacking point (6.1.1 (c) (i))
Offside Rear Brake hose excessively chafed rubbing (1.1.12 (b) (ii))
Offside Rear Shock absorbers damaged to the extent that it does not function (5.3.2 (b))
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis out riger (6.1.1 (c) (i))
Oil leaking excessively from engine (8.4.1 (a) (i))
Rear Brake load sensing valve seized but ABS functioning (1.1.17 (c) (i))
Coolant leak ()
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Steering rack gaiter damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside steering rack worn
Seat belt anchorage prescribed area is corroded but not considered excessive both sills (7.1.1 (a) (i))
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Service brake excessively fluctuating (1.2.1 (e))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Nearside Steering rack gaiter damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside steering rack worn
Seat belt anchorage prescribed area is corroded but not considered excessive both sills (7.1.1 (a) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
jet wash required o/s/f before retest
Exhaust emissions exceed manufacturer's specified limit plate limit 1.3 (8.2.2.2 (a))
Front Service brake excessively fluctuating (1.2.1 (e))
Fuel system component leaking in engine bay (6.1.3 (b) (i))
Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Headlamp aim too high (4.1.2 (a))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Rear Service brake excessively fluctuating (1.2.1 (e))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
jet wash required o/s/f before retest
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Outer sill corroded
Oil leak ()
underside of vehicle corroded
Nearside Headlamp aim too low (1.8)
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Headlamp not working on dipped beam (1.7.5a)
Rear fog lamp not working (1.3.2b)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Outer sill corroded
Oil leak ()
underside of vehicle corroded
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Fuel system component leaking (7.2.3)
Horn not working (1.6.2a)
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Headlamp not working on dipped beam (1.7.5a)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Brakes imbalanced across an axle (3.7.B.5b)
Driver's door cannot be opened from inside the vehicle (6.2.B.1b)
Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside rear brake recording little or no effort (3.7.B.5a)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
rear brake recording little or no effort (3.7.B.5a) DANGEROUS
brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Front constant velocity joint is slightly worn (2.5.C.1b)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Front constant velocity joint is slightly worn (2.5.C.1b)
REAR BRAKES WORKING SLIGHTLY UNEVEN
coolant leaking
Nearside Windscreen wiper blade deteriorated (8.2.2)
Offside Windscreen wiper blade deteriorated (8.2.2)
REAR BRAKES WORKING SLIGHTLY UNEVEN
coolant leaking
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
S883 DHC is a 1998 Mercedes-benz Vito in Green with a 2,299cc diesel engine. This vehicle has been through 24 MOT tests with a personal pass rate of 54.2%.
Across all 1998 Mercedes-benz Vito models, the average MOT pass rate is 61.4% with a typical mileage of 123,856 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying S883 DHC, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 28 years old, this Mercedes-benz Vito is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of S883 DHC?
You can check the full history of S883 DHC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was S883 DHC registered?
S883 DHC is a 1998 Mercedes-benz Vito, first registered on 9 October 1998.
Is S883 DHC safe to buy?
The MOT history for S883 DHC shows 24 tests with a 54.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does S883 DHC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on S883 DHC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.