1998 Honda C90

Front Suspension ball joint worn, but not excessively both sides (5.3.4 (a) (i))

Rear Brake lining(s) close to minimum limit (1.1.13 (a))

Chain guard missing

Exhaust noisy (7.1.2)

Offside Rear Direction indicators not working (1.5.1c)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Chain guard missing

Exhaust noisy (7.1.2)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Chain guard missing

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Drive chain worn to excess (6.2.1e)

Rear Brake reaction bracket insecure (3.2.A1j)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Chain guard missing

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Direction indicators not working (1.5.1c)

Drive chain excessively loose (6.2.1d)

Drive chain worn to excess (6.2.1e)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Horn not working (1.7.3a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Wheel spoke excessively loose (4.2.1b)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Drive chain sprocket slightly worn (6.2.1e)

Drive chain slightly loose (6.2.1d)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Rear wheel bearings have slight free play (2.4.A.2c)

Headlamp aim too high (1.6)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Rear Wheel has a slightly eccentric bead rim. (4.2.2)

Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Steering movement slightly 'notchy' (2.2.1b)

Front Steering movement slightly 'notchy' (2.2.1b)

Front Tyre fouling another component (4.1.4)

Rear Brake reaction bracket securing bolt(s) loose (3.2.A1j)

Rear Wheel alignment incorrect which adversely affects the steering (2.5.1)

Front Steering movement slightly 'notchy' (2.2.1b)

Rear Brake locking device missing (3.2.A1e)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)