MOT Status
ValidMileage
148,962 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Suspension arm pin or bush worn but not resulting in excessive movement OS+NS (5.3.4 (a) (i))
Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Central Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Front Suspension arm pin or bush worn but not resulting in excessive movement OS+NS (5.3.4 (a) (i))
Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Central Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced lower arch (6.1.1 (c) (i))
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced corner by crash bar (6.1.1 (c) (i))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))
Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced corner by crash bar (6.1.1 (c) (i))
Offside Rear Service brake lagging in operation (1.2.1 (d))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Brake disc worn, but not excessively front and rear (1.1.14 (a) (i))
Brake pipe corroded, covered in grease or other material nearside and offside to rear (1.1.11 (c))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Rear Suspension component mounting prescribed area damaged but not considered excessive inner sill (5.3.6 (a) (i))
Offside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear lamp damage not effect on light output
drivers seat deterioration
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Inner Brake disc worn, pitted or scored, but not seriously weakened corroded (1.1.14 (a) (ii))
Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened correded (1.1.14 (a) (ii))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Front Play in steering rack inner joint(s)
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Front Seat belt slightly damaged (7.1.2 (b) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Nearside Front Upper Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Seat belt slightly damaged (7.1.2 (b) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear light lens damaged
Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Front Play in steering rack inner joint(s)
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Front Seat belt slightly damaged (7.1.2 (b) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Nearside Front Upper Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Seat belt slightly damaged (7.1.2 (b) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear light lens damaged
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i))
Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))
Front Play in steering rack inner joint(s)
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Seat belt slightly damaged (7.1.2 (b) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Nearside Suspension component mounting prescribed area is corroded but not considered excessive front to rear inner and outer sills (5.3.6 (a) (i))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Seat belt slightly damaged (7.1.2 (b) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Offside Suspension component mounting prescribed area is corroded but not considered excessive front to rear inner and outer sills (5.3.6 (a) (i))
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Seat belt damaged but not affecting the operation of the belt (5.2.2a)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sill (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sill (2.4.A.3)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Play in steering rack inner joint(s)
Nearside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Seat belt damaged but not affecting the operation of the belt (5.2.2a)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sill (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sill (2.4.A.3)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Play in steering rack inner joint(s)
Brake load sensing valve stiff (3.6.E.3)
Nearside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Seat belt damaged but not affecting the operation of the belt (5.2.2a)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Play in steering rack inner joint(s)
Nearside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)
Nearside Stop lamp not working (1.2.1b)
Nearside rear brake recording little or no effort (3.7.B.5a)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside rear brake recording little or no effort (3.7.B.5a)
Brake load sensing valve stiff (3.6.E.3)
Nearside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Seat belt damaged but not affecting the operation of the belt (5.2.2a)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Play in steering rack inner joint(s)
Both inner driveshaft boots perished.
Both rear brake discs rusty.
Front exhaust mount missing bu system is supported.
N/s handbrake efficiency is poor compared to o/s.
N/s outer sill generally rusty.
Nearside Front Tyre worn close to limit.
O/s/f tyre worn very close to limit and bald on inner edge.
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
both front tyres starting to wear on inner edge
Centre Lower Exhaust has a major leak of exhaust gases (7.1.2)
Offside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
both front tyres starting to wear on inner edge
At offside front; sill edge deformed.
Nearside Inner Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Inner Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is distorted but not considered excessive (2.4.A.3)
Play in steering rack inner joint(s)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)
Nearside Headlamp aim too high (1.8)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
At offside front; sill edge deformed.
Nearside Inner Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Inner Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is distorted but not considered excessive (2.4.A.3)
Play in steering rack inner joint(s)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)
Vehicle's internal headlight adjuster altered to recheck lights
Play in steering rack inner joint(s)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front Exhaust system not adequately supported (7.1.1)
Nearside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Parking brake lever has little reserve travel (3.1.6b)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Play in steering rack inner joint(s)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Centre Exhaust has part of the system slightly deteriorated (7.1.1a)
Front Brake Discs Worn
Nearside Inner CV Boot Split
Offside Inner CV Boot Split
Rear Brake Discs Worn
Nearside Front Brake hose excessively deteriorated (3.6.B.4d)
Offside Front Brake hose excessively deteriorated (3.6.B.4d)
Centre Exhaust has part of the system slightly deteriorated (7.1.1a)
Front Brake Discs Worn
Nearside Inner CV Boot Split
Offside Inner CV Boot Split
Rear Brake Discs Worn
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
S900 LTH is a 2000 Mercedes-benz Vito in Grey with a 2,148cc diesel engine. This vehicle has been through 32 MOT tests with a personal pass rate of 62.5%.
Across all 2000 Mercedes-benz Vito models, the average MOT pass rate is 62.9% with a typical mileage of 111,462 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying S900 LTH, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 26 years old, this Mercedes-benz Vito is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of S900 LTH?
You can check the full history of S900 LTH by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was S900 LTH registered?
S900 LTH is a 2000 Mercedes-benz Vito, first registered on 17 July 2000.
Is S900 LTH safe to buy?
The MOT history for S900 LTH shows 32 tests with a 62.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does S900 LTH have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on S900 LTH. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.