MOT Status
ValidMileage
95,863 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Service brake excessively binding (1.2.1 (f))
Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Coil spring corroded ALL 4 SPRINGS (5.3.1 (b) (i))
Play in steering rack inner joint(s) ()
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Coil spring corroded ALL 4 SPRINGS (5.3.1 (b) (i))
Play in steering rack inner joint(s) ()
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Battery insecure and likely to fall from carrier (4.13 (a) (ii))
Front Brakes imbalanced across an axle (1.2.1 (b) (i))
Nearside Front Headlamp aim too low (4.1.2 (a))
Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))
Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill on conner of wheel arch (6.2.2 (d) (i))
Offside Rear Wheel bearing has excessive play (5.1.3 (a) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Coil spring corroded all four (5.3.1 (b) (i))
Play in steering rack inner joint(s) ()
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Steering rack has slight free play detected at steering wheel (2.3 (a) (i))
vehicle has black sealant under vehicle
Front Brakes imbalanced across an axle (1.2.1 (b) (i))
Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Coil spring corroded all (5.3.1 (b) (i))
Front Windscreen damaged but not adversely affecting driver's view x2 chip (3.2 (a) (i))
Rear Shock absorbers has light misting of oil both (5.3.2 (b))
Rear Stop lamp(s) non-obligatory stop lamp not working middle (4.3.1 (a) (ii))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
engine noisy
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Wheel bearing has excessive play (5.1.3 (a) (i))
Oil leaking excessively from engine (8.4.1 (a) (i))
Coil spring corroded all (5.3.1 (b) (i))
Front Windscreen damaged but not adversely affecting driver's view x2 chip (3.2 (a) (i))
Nearside Front Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Rear Shock absorbers has light misting of oil both (5.3.2 (b))
Rear Stop lamp(s) non-obligatory stop lamp not working middle (4.3.1 (a) (ii))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Coil spring corroded both (5.3.1 (b) (i))
Rear Coil spring corroded both (5.3.1 (b) (i))
surface rust
Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))
Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inner sill (6.2.2 (d) (i))
Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Oil leaking excessively from engine (8.4.1 (a) (i))
Front Tyre has a tear, caused by separation or partial failure of its structure both (5.2.3 (d) (ii)) DANGEROUS
Front Coil spring corroded both (5.3.1 (b) (i))
Rear Coil spring corroded both (5.3.1 (b) (i))
surface rust
Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Windscreen wiper not working (3.4 (a))
Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill marked all yellow (7.1.1 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Oil leak, but not excessive (8.4.1 (a) (i))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Nearside Front Windscreen wiper not working (3.4 (a))
Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Lower Seat belt anchorage prescribed area is distorted but not considered excessive (5.2.6)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Shock absorber has a light misting of oil (2.7.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Horn not working (1.6.2a)
Nearside Front Tie bar/rod has excessive play in a pin/bush (2.4.G.2)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Tie bar/rod has excessive play in a pin/bush (2.4.G.2)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Fuel pipe/s corroded
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Fuel pipe/s corroded
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Cut in sidewall of nearside front tyre
Fuel pipe/s corroded
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Cut in sidewall of nearside front tyre
Fuel pipe/s corroded
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Subframe mounting prescribed area is distorted but not considered excessive (2.4.A.3)
Offside Front Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Subframe mounting prescribed area is distorted but not considered excessive (2.4.A.3)
Offside Front Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
advanced corrosion to nearside rear sill
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
advanced corrosion to nearside rear sill
Nearside Front Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Registration plate lamp not working (1.1.5c)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Road wheel slightly damaged (4.2.A.1a)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
nearside front tyre side wall cut but not to cord
Front Brake pad(s) wearing thin (3.5.1g)
nearside front wheel and tyre sidewall slightly damaged
How Reliable is the Daihatsu Cuore?
Based on 59,235 MOT tests across 5,564 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
S907 JTP is a 1998 Daihatsu Cuore in Blue with a 847cc petrol engine. This vehicle has been through 36 MOT tests with a personal pass rate of 55.6%.
Across all 1998 Daihatsu Cuore models, the average MOT pass rate is 69.9% with a typical mileage of 55,274 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Daihatsu Cuore fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 3,271 recorded failures. If you're considering buying S907 JTP, it's worth having these areas checked by a mechanic before committing.
The Daihatsu Cuore typically stays on UK roads for around 29 years. At 28 years old, this Daihatsu Cuore is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of S907 JTP?
You can check the full history of S907 JTP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was S907 JTP registered?
S907 JTP is a 1998 Daihatsu Cuore, first registered on 30 September 1998.
Is S907 JTP safe to buy?
The MOT history for S907 JTP shows 36 tests with a 55.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does S907 JTP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on S907 JTP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.