1999 Vauxhall Corsa

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear wheel bearing has slight play (2.6.2)

Oil leak

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear wheel bearing has slight play (2.6.2)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Battery insecure

Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

both front brake discs rusty

both front wiper blades split at ends

both rear inner sills and front X member rusty

rear wiper blade defective

Centre Exhaust system not adequately supported (7.1.1)

Battery insecure

Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

both front brake discs rusty

both front wiper blades split at ends

both rear inner sills and front X member rusty

rear wiper blade defective

Rear wheel bearing has slight play (2.6.2)

Nearside Front position lamp(s) not in good working order (function impaired) (1.1.4a)

Offside Front Upper Seat belt anchorage prescribed area is fractured (5.2.6)

Offside Headlamp not working on dipped beam (1.7.5a)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Rear wheel bearing has slight play (2.6.2)

Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)

offsde front tie rod mount area starting to rust

offside b post paintwork chipped poss fracture starting

offside front wiper blade deterioating

Brake servo leaking (3.6.C.1c)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

offsde front tie rod mount area starting to rust

offside b post paintwork chipped poss fracture starting

offside front wiper blade deterioating

Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

both front wiper blades in poor condition/smearing screen

engine oil level low

rear brakes showing slight imbalance

surface rust nearside rear inner sill

Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

both front wiper blades in poor condition/smearing screen

engine oil level low

rear brakes showing slight imbalance

surface rust nearside rear inner sill

Nearside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Nearside Stop lamp not working (1.2.1b)

Offside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Front Brake pad(s) wearing thin (3.5.1g)

front brakes showing imbalance

surface corrosion bulkhead drain area and both rear inner sills