MOT Status
ExpiredMileage
160,195 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Front Track rod end ball joint has slight play (2.2.B.1f)
Front and Rear inner brake pads wearing thin
Nearside Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)
Oil leak
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Play in steering rack inner joint(s)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
front and rear discs wearing low
undersealer applied to under chassis and prescrbied areas
Front Ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Front Track rod end ball joint has slight play (2.2.B.1f)
Front and Rear inner brake pads wearing thin
Nearside Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)
Oil leak
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Play in steering rack inner joint(s)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Windscreen washer provides insufficient washer liquid (8.2.3)
front and rear discs wearing low
undersealer applied to under chassis and prescrbied areas
Exhaust has a minor leak of exhaust gases (7.1.2)
Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Outer Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)
Rear Shock absorber has a light misting of oil (2.7.3)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Exhaust has a minor leak of exhaust gases (7.1.2)
Front Brake pipe slightly corroded (3.6.B.2c)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Stop lamp not working (1.2.1b)
Front All position lamps not working (1.1.A.3b)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)
Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)
Nearside Front Steering rack gaiter split (2.2.D.2d)
Nearside Rear Rear position lamp(s) incorrect colour (1.1.A.3e)
Offside Front Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)
Offside Front Headlamp not working on dipped beam (1.7.5a)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Inner Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Inner Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Inner Front Body has slight corrosion (6.1.B.2)
Nearside Inner Rear Body has slight corrosion (6.1.B.2)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Inner Front Body has slight corrosion (6.1.B.2)
Offside Inner Rear Body has slight corrosion (6.1.B.2)
Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside Rear position lamp(s) incorrect colour (1.1.A.3e)
Offside Front Anti-roll bar linkage insecure (2.4.G.1)
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Inner Front Body has slight corrosion (6.1.B.2)
Nearside Inner Rear Body has slight corrosion (6.1.B.2)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Inner Front Body has slight corrosion (6.1.B.2)
Offside Inner Rear Body has slight corrosion (6.1.B.2)
Offside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Brake pad(s) less than 1.5 mm thick (3.5.1g)
Brake pipe excessively corroded (3.6.B.2c)
Front passenger door cannot be opened from outside the vehicle (6.2.B.1b)
Fuel system component leaking (7.2.3)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear coil spring incomplete (2.4.C.1a)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Steering rack gaiter split (2.2.D.2d)
Offside Front Anti-roll bar linkage insecure (2.4.G.1)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Front Lower Front suspension has excessive movement at a wishbone pin or bush (2.5.A.1c)
Offside Front Lower Suspension arm locating pin insecure (2.4.G.3a)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Tyre tread depth below requirements of 1.6mm (4.1.E.1)
brake disc excessively pitted (3.5.1h)
front brake application uneven (3.7.B.2)
Corrosion to ;- Rear underside of vehicle,by front sub-frame mountings,rear inner sills,O/S oter sill
Front sub-frame rear mounting bushes worn
N/S/F anti-roll bar mounting bush worn
N/S/F lower wishbone,front bush worn
Nail in N/S/R tyre
O/S driveshaft inner C/V gaiter split
Play in O/S steering rack end(not track rod end)
S/B/P to N/S/F corroding
Scratches in windscreen
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear coil spring incomplete (2.4.C.1a)
Offside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Windscreen washer provides insufficient washer liquid (8.2.3)
Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Upper Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
n/s/f drive shaft inner gaiter split
rear shock absorber dust covers badly corroded
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
S929 KPY is a 1998 Mercedes-benz Vito in Black with a 2,299cc diesel engine. This vehicle has been through 15 MOT tests with a personal pass rate of 60%.
Across all 1998 Mercedes-benz Vito models, the average MOT pass rate is 61.4% with a typical mileage of 123,856 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying S929 KPY, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 28 years old, this Mercedes-benz Vito is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of S929 KPY?
You can check the full history of S929 KPY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was S929 KPY registered?
S929 KPY is a 1998 Mercedes-benz Vito, first registered on 17 August 1998.
Is S929 KPY safe to buy?
The MOT history for S929 KPY shows 15 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does S929 KPY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on S929 KPY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.