1998 BMW 540

Front Inner Brake disc worn, but not excessively BOTH SIDES (1.1.14 (a) (i))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement BOTH SIDES (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

UNDERBODY COVERED IN UNDERSEAL

Offside Rear Road wheel fixing loose (5.2.1 (a) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Front Inner Brake disc worn, but not excessively BOTH SIDES (1.1.14 (a) (i))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement BOTH SIDES (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

UNDERBODY COVERED IN UNDERSEAL

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Outer Suspension component mounting repair covered in underseal sills (5.3.6 (a) (i))

underbody covered in underseal

Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

all under body covered in black substance

tested in wet condition

Rear Suspension component mounting prescribed area fractured significantly reducing structural strength floor both sides (5.3.6 (a) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

all under body covered in black substance

tested in wet condition

Fuel Pipe/s corroded

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

both sill under seal full inspection could npt be carried out

under trays fitted

Front Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Fuel Pipe/s corroded

Rear Brake pipe corroded, covered in grease or other material both (1.1.11 (c))

Side repeater slightly discoloured both sides (4.4.3 (a))

due to heavy under seal full inspection could not be carried out

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Front Brake pipe excessively corroded (1.1.11 (c))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Rear Inner Integral body structure inadequately repaired such that structural rigidity is significantly reduced sill (6.1.1 (d) (i))

Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Offside Rear Inner Integral body structure inadequately repaired such that structural rigidity is significantly reduced sill (6.1.1 (d) (i))

Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Rear Brake pipe excessively corroded (1.1.11 (c))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Fuel Pipe/s corroded

Nearside All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

front to rear brake pipes corroded x 2

fuel pipes corroded

offside front tyresworn on edges

offside rear tyre cut

front to rear metal brake pipes corroded

Windscreen wiper does not clear the windscreen effectively (8.2.2)

front to rear metal brake pipes corroded

Horn not working (1.6.2a)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.D.4)

Centre Stop lamp remains on when the brakes are released (1.2.1e)

Driver's door cannot be opened from inside the vehicle (6.2.B.1b)

Driver's door cannot be opened from outside the vehicle (6.2.B.1b)

Horn not working (1.6.2a)

Nearside Stop lamp not working (1.2.1b)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Stop lamp not working (1.2.1b)

both fron t tyres starting to split

o/s rear tyre starting to split

Parking brake: efficiency below requirements (3.7.D.4)

poss slight wear noted to nsf wheel bearing

side wall damage noted to nsf and osf tyres

slight judder n ote to front brake discs

slight oil leak noted from engine

surface corrosion noted to brake discs

slight judder noted to front brake discs

surface corrosion noted to brake pipes

Brake pedal anti-slip provision missing (3.3.A.1b)

Centre Statutory seat belt missing (5.1.1)

Nearside Rear Direction indicator incorrect colour (1.4.A.2f)

Nearside Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front wheel bearing rough when rotated (2.5.A.2)

Offside Rear Direction indicator incorrect colour (1.4.A.2f)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

slight judder noted to front brake discs

surface corrosion noted to brake pedal

Parking brake: efficiency below requirements (3.7.B.7)