MOT Status
ValidMileage
177,996 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength suspension arm mounting point (5.3.6 (a) (i))
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))
Offside Front Lower Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength droplink mounting point (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength suspension arm mounting point (5.3.6 (a) (i))
Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Lower Anti-roll bar pin or bush worn but not resulting in excessive movement d bush (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Power steering pipe/hose has slight seepage (2.1.5 (a))
underbody heavily undersealed
under body heavely undersealed
Brake lever has insufficient reserve travel (1.1.2 (a))
Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b))
Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Power steering component leaking (2.1.5 (a))
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Rear Parking (secondary brake) on a single line braking system has no recorded effort at a wheel (1.3.1 (a) (ii)) DANGEROUS
Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))
Nearside Vehicle structure inadequately repaired such that structural rigidity is significantly reduced inner sill (6.1.1 (d) (i))
Offside Rear shock absorber casing corroded.
coil springs corroded.
underbody sills and chassis undersealed.
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting and outer sills holed/corroded (6.2.2 (d) (i))
Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sills and chassis corroding (5.3.6 (a) (i))
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt cv boot torn (6.1.7 (g) (ii))
Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting and outer sills holed/corroded (6.2.2 (d) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch holed (5.3.6 (a) (i))
Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sills corroded (5.3.6 (a) (i))
Front cross member supporting radiator holed/corroded
Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Lower Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sills cooroding (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis and suspension arms corroding (5.3.6 (a) (i))
Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Front Drive shaft joint constant velocity boot severely deteriorated outer boot (6.1.7 (g) (i))
Offside Lower Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sills corroding (5.3.6 (a) (i))
Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis and suspension arms corroding (5.3.6 (a) (i))
Rear Coil spring corroded o/s and n/s (5.3.1 (b) (i))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced Sill corroded midway (6.1.1 (c) (i))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced sill corroded midway (6.1.1 (c) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill by suspension arm mounting (5.3.6 (a) (i))
Nearside Rear Seat belt missing (7.1.2 (a))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced Sill corroded midway (6.1.1 (c) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced sill corroded midway (6.1.1 (c) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill by suspension arm mounting (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))
Front Subframe mounting prescribed area is excessively corroded cross member under radiator (2.4.A.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Headlamp not working on dipped beam (1.7.5a)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Rear fog lamp not working (1.3.2b)
n/s/r hub cap fouling on valve
no plate didgets small but imported model
Rear fog lamp not working (1.3.2b)
n/s/r hub cap fouling on valve
no plate didgets small but imported model
Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Nearside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Offside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Rear fog lamp not working (1.3.2b)
Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Nearside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Offside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Exhaust has a major leak of exhaust gases (7.1.2)
Rear brake disc in such a condition that it is seriously weakened (3.5.1i)
Rear fog lamp not working (1.3.2b)
Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)
Offside Rear Rear fog lamp not working (1.3.2b)
Nearside Headlamp aim too low (1.8)
Nearside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Offside Headlamp aim too low (1.8)
Offside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
S932 SVK is a 1998 Mazda Bongo in Silver with a 2,500cc diesel engine. This vehicle has been through 30 MOT tests with a personal pass rate of 56.7%.
Across all 1998 Mazda Bongo models, the average MOT pass rate is 67.1% with a typical mileage of 125,789 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying S932 SVK, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 28 years old, this Mazda Bongo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of S932 SVK?
You can check the full history of S932 SVK by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was S932 SVK registered?
S932 SVK is a 1998 Mazda Bongo, first registered on 31 December 1998.
Is S932 SVK safe to buy?
The MOT history for S932 SVK shows 30 tests with a 56.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does S932 SVK have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on S932 SVK. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.