1998 Honda C90

Rear Wheel spoke excessively loose (5.2.2 (d))

Front Stop lamp remains on when the brakes are released (4.3.2 (a) (iii)) DANGEROUS

Rear Motorcycle structure joining/attachment plate or fastening so insecure that structural rigidity is seriously reduced rear frame (6.1.1 (b) (ii)) DANGEROUS

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Rear Wheel spoke slightly bent (5.2.2 (d))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Rear All position lamps not working (4.2.1 (a))

Rear Wheel spoke slightly bent (5.2.2 (d))

Rear Wheel spoke slightly bent. (4.2.1b)

Front Brake lever cannot be released smoothly (3.1.3d)

Front Roller brake test indicates a sticking brake (3.3.A1a)

Front Stop lamp remains on when the brake is released (1.3.1e)

Front suspension has inadequate damping effect. (2.3.6c)

Offside Lower Front suspension assembly component loose (2.3.1)

Offside Rear Direction indicator insecure (1.5.3b)

Rear Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Rear Wheel spoke cracked. (4.2.1b)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Rear Brake lining(s) close to minimum limit (3.2.A1f(i))

Rear Wheel spoke slightly bent. (4.2.1b)

Front suspension assembly excessive wear or free play in a front suspension component (2.3.4)

Rear Brake reaction bracket insecure (3.2.A1j)

Rear Brake drum(s) friction surface contaminated by oil or grease (3.2.A1k)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.2a(i))

Horn not working (1.7.3a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Direction indicators flashing less than 60 times a minute (1.5.1c)

Horn sounds harsh or grating (1.7.3c)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Front Horn not working (1.7.3a)

Front Steering linkage has excessive free play (2.2.2)

Rear Brake pedal cannot be released smoothly (3.1.3d)

front wheel layes over to the fork when front suspension is moved

Front Brake lever is bent and the brake cannot be readily applied (3.1.3c)

Roller brake test Neither brake control achieves an efficiency of 25% (3.3.A2b)

Roller brake test No brake control achieves an efficiency of 30%. (3.3.A2a)