1998 Rover 420

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Inner Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Radius arm has excessive play in a pin/bush (2.4.G.2)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Inner Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Radius arm has excessive play in a pin/bush (2.4.G.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Engine covers fitted obscuring some components in the engine bay

Front Brake pad(s) wearing thin (3.5.1g)

Front Track rod end ball joint has slight play (2.2.B.1f)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front bumper insecure

N/S/wing mirror damage

Oil leak

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

RTA front

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Suspension arm has slight play in a pin/bush (2.4.G.2)

Under-trays fitted obscuring some underside components

side cover fitted

Front Anti-roll bar corroded but not seriously weakened (2.4.G.1)

Front Brake pad(s) wearing thin (3.5.1g)

Oil leak

n/s/r wheel arch show corrosion

rear brakes back plates show corrosion

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Non obligatory mirror damaged

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Registration plate lamp not working (1.1.5c)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Front constant velocity joint gaiter split (2.5.C.1a)

Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Rear Front position lamp(s) not working (1.1.A.3b)

Exhaust emits an excessive level of metered smoke for a non-turbo charged engine (7.4.B.3b)

Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Front Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Driver's door cannot be opened from inside the vehicle (6.2.B.1b)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Stop lamp not working (1.2.1b)

Steering column will not lock in a fixed position (adjustable type) (2.1.2a)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

vehicle tested under wet conition