1998 Mazda 323

Front registration plate deteriorated (6.3.1d)

Nearside Front Windscreen wiper blade insecure (8.2.2)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Side repeater excessively damaged so that it is not visible from a reasonable distance (1.4.A.2e)

Nearside rear brake juddering severely (3.7.A.5b)

Offside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Obligatory mirror missing (8.1.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear rear brake binding (3.7.B.1)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Brake pipe slightly corroded (3.6.B.2c)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Front wheel bearing has slight play (2.5.A.3c)

Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Vehicle structure has slight corrosion (6.1.A.1)

coil spring corroded (2.4.C.1b)

Exhaust system not adequately supported (7.1.1)

Exhaust tailpipe not capable of allowing the emission probe to be inserted (7.3.D.1)

Front registration plate deteriorated (6.3.1d)

Nearside Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Nearside Rear rear brake binding (3.7.B.1)

Nearside Side repeater missing (1.4.A.2b)

Nearside Side repeater not working (1.4.A.2c)

Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Front wheel bearing rough when rotated (2.5.A.2)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside Rear coil spring fractured (2.4.C.1a)

Offside Rear rear brake binding (3.7.B.1)

Registration plate lamp not working (1.1.C.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

emission test aborted

front pads low

front x member very rusty

sub frames very rusty

Brake pipe slightly corroded (3.6.B.2c)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust system not adequately supported (7.1.1)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside rear brake binding (3.7.B.1)

Offside Front brake caliper leaking (3.6.A.1)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Registration plate lamp not working (1.1.C.1d)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Windscreen washer provides insufficient washer liquid (8.2.3)

Brake pipe slightly corroded (3.6.B.2c)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Front Lower Ball joint has excessive play (2.2.B.1f)

Offside Front position lamp(s) not working (1.1.A.3b)

Rear Registration plate lamp not working (1.1.5c)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Offside rear brake recording little or no effort (3.7.B.5a)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Stop lamp not working (1.2.1b)

Offside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Brakes imbalanced across an axle (3.7.D.2c)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front brake disc excessively scored (3.5.1h)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front brake disc excessively scored (3.5.1h)

Rear Suspension arm has excessive play in a pin/bush (2.4.G.2)