1999 Aprilia RS125

All direction indicators flashing less than 60 times a minute (4.4.4 (a))

Front Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b))

Wheel alignment incorrect which adversely affects the steering (2.4 (a))

All direction indicators flashing less than 60 times a minute (4.4.4 (a))

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Fuel pipe slightly loose at carburetor (6.1.3 (a) (i))

rear sprocket carrier worn

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Fuel pipe slightly loose at carburetor (6.1.3 (a) (i))

Headlamp aim too far to the right (4.1.2 (a))

rear sprocket carrier worn

Nearside Front Direction indicator incorrect colour (4.4.3 (a))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Stop lamp not working (4.3.1 (a) (ii))

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Front Brake hose slightly twisted (1.1.12 (b) (i))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Fuel pipe slightly loose carb clip loose (6.1.3 (a) (i))

rear sprocket carrier worn

Clutch lever bent (6.2.1g)

Drive chain slightly loose (6.2.1d)

Fairings insecure but not likely to impede the steering (2.1.2e)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Clutch lever bent (6.2.1g)

Drive chain slightly loose (6.2.1d)

Fairings insecure but not likely to impede the steering (2.1.2e)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Headlamp aim beam image kick up to the offside (1.6)

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Offside Front shock absorber has light misting of stanchion (2.3.3)

chain split link fitted in wrong direction

Fuel cap mounting flange/sealing method defective (7.2.2c)

Fuel system component leaking (7.2.1a)

Nearside Handlebar mounting clamp bolt loose (2.1.1a)

Riders seat insecure (6.2.1a)

Offside Front shock absorber has light misting of stanchion (2.3.3)

chain split link fitted in wrong direction

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Front Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k)

Front Brake pad(s) contaminated by oil or grease (3.2.A1k)

Front wheel bearings have excessive free play (2.3.5b)

Headlamp aim too high (1.6)

Nearside Front Direction indicators flashing less than 60 times a minute (1.5.1c)

Nearside Handlebar mounting clamp bolt loose (2.1.1a)

Nearside Rear Direction indicators flashing less than 60 times a minute (1.5.1c)

Offside Front Direction indicators flashing less than 60 times a minute (1.5.1c)

Offside Front Front shock absorber seal failed and leaking oil (2.3.3)

Offside Rear Direction indicators flashing less than 60 times a minute (1.5.1c)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Gear lever bolt loose

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Drive chain slightly tight (6.2.1d)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Steering control has reduced clearance at full lock not affecting the riders grasp of handlebars (2.1.2b)