1998 Nissan Almera

Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Inner Lower Vehicle structure has slight corrosion (6.1.B.2)

Offside Front Steering rack gaiter deteriorated (2.2.D.2d)

Rear Brake pipe slightly corroded (3.6.B.2c)

Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Brake pipe slightly corroded (3.6.B.2c)

Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Steering rack gaiter split (2.2.D.2d)

Outer Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Lower Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Lower Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)

Offside Front Power steering pipe(s) or hose(s) has slight seepage from a joint (2.3.3b)

Both rear brake pipes corroded. Cannot determine diameter of pipes

Nearside Rear Lower Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Lower Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Power steering pipe(s) or hose(s) has slight seepage from a joint (2.3.3b)

Both rear brake pipes corroded. Cannot determine diameter of pipes

Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

near side rear tyre has cracks on side wall

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Registration plate lamp not working (1.1.C.1d)

Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS

Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

near side rear tyre has cracks on side wall

Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front position lamp(s) not working (1.1.A.3b)