1999 Mbk Nitro

Front Brake locking device missing brake pad pin (3.2.A1e)

Front Stop lamp remains on when the brake is released (1.3.1e)

Front wheel bearings are excessively rough (2.3.5b)

Headlamp aim too high (1.6)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Lower Rear suspension bush has excessive free play (2.4.A2a(i))

Rear Roller brake test indicates a binding brake (3.3.A1a)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Rear Lower Rear shock absorber insecurely mounted (2.4.A.3b) DANGEROUS

Brake disc(s) has slight run out (3.2.A1m)

Front wheel bearings have slight free play (2.3.5b)

Rear Brake hose slightly kinked (3.2.B3a)

Rear Roller brake test indicates a slightly juddering brake (3.3.A1b)

Steering headbearing has slight free play borderline (2.2.2)

Front Brake disc(s) has excessive run out (3.2.A1m)

Front Fairings insecure and likely to impede the steering (2.1.2e)

Front Lower Front suspension has severe distortion of a load bearing member or its supporting structure. (2.3.8)

Front Steering movement excessively stiff with the weight on the lower bearing (2.2.1a)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.2a(i))

Nearside Front Direction indicators not working (1.5.1c)

Rear Brake pipe inadequately supported (3.2.B2b)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

front tyre perished

Headlamp aim headlamp deteriorated and function impaired (1.2.3a)

rear disc slightly pitted

rear tyre worn to1mm

steering alignment slightly out