1998 Hyundai Lantra

Braking system leaking n/s/r cylinder (3.6.A.1)

Exhaust has a major leak of exhaust gases front flexi (7.1.2)

Exhaust system not adequately supported rear (7.1.1)

Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc front both (2.5.C.1a)

Front position lamp(s) not working n/s (1.1.A.3b)

Headlamp aim too high both (1.8)

Parking brake: efficiency below requirements (3.7.B.7)

Registration plate lamp not working (1.1.C.1d)

Seat belt stitching badly frayed drivers side (5.2.2b)

Service brake: efficiency below requirements (3.7.B.7)

Suspension arm rubber bush deteriorated resulting in excessive movement n/s/r hub bush play (2.4.G.2)

Tyre tread depth below requirements of 1.6mm o/s/f/and both rear tyres also n/s/f tyre cords showing (4.1.E.1)

Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s/r outer sill (6.1.B.2)

Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s/r outer sill (6.1.B.2)

emission not tested

Nearside Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Track rod end ball joint has slight play (2.2.B.1f)

Oil leak

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

offside rear sill has slight corrosion

Front Front position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

slight oil leak.

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Front Seat belt stitching slightly frayed (5.2.2b)

Parking brake lever has little reserve travel (3.1.6b)

Rear Brake pipe slightly corroded (3.6.B.2c)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Front registration plate deteriorated (6.3.1d)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Front Seat belt stitching slightly frayed (5.2.2b)

Parking brake lever has little reserve travel (3.1.6b)

Rear Brake pipe slightly corroded (3.6.B.2c)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front registration plate deteriorated (6.3.1d)

Nearside Front Headlamp aim too high and too far to the left. (1.8)

Offside Front Headlamp aim too high (1.8)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Rear Stop lamp not working (1.2.1b)

Nearside Stop lamp not working (1.2.1b)

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Stop lamp not working (1.2.1b)