CarVerify

Free Car Check

S982 TGB

1998 Mazda Bongo

Grey Diesel 2495cc
Search another vehicle

MOT Status

Expired
Expires28 Jul 2026
Tests26 (18 pass, 8 fail)
Pass rate69.2%

Mileage

175,803 mi
Last recorded175,803 miles
Recorded on23 Jul 2025
Typical for 1998 Mazda Bongo125,789 mi

Above average mileage for this year

4 checks still locked for this Mazda
Stolen
Finance
Write-off
Keepers
Unlock full report — £4.99
Instant £30k guarantee
or single check £14.99

Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.

Vehicle Details

RegistrationS982 TGB
MakeMazda
ModelBongo
Year1998
ColourGrey
Fuel typeDiesel
Engine2,495cc

All premium checks include

50+ data points
Finance Check (Experian) Insurance Write-off Salvage Auction Stolen Check Previous Owners Ex-Taxi, Police, NHS Mileage Anomaly Import / Export Scrapped Check Plate Changes

MOT History

18 pass 8 fail
Pass 23 Jul 2025 175,803 miles

Front Brake hose has slight corrosion to ferrule both fronts (1.1.12 (f) (i))

Front Brake pipe corroded, covered in grease or other material both fronts (1.1.11 (c))

Front Integral body structure is corroded but structural rigidity is not significantly reduced crossmember (6.1.1 (c) (i))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced arch (6.1.1 (c) (i))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced jacking point (6.1.1 (c) (i))

Nearside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced jacking point (6.1.1 (c) (i))

Offside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Brake hose has slight corrosion to ferrule both rear (1.1.12 (f) (i))

Rear Brake pipe corroded, covered in grease or other material both rears (1.1.11 (c))

Pass 10 Jul 2024 170,884 miles

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Upper Integral body structure is corroded but structural rigidity is not significantly reduced chassis leg (6.1.1 (c) (i))

Nearside Rear Upper Integral body structure is corroded but structural rigidity is not significantly reduced chassis leg (6.1.1 (c) (i))

Nearside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Inner Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Fail 8 Jul 2024 170,876 miles

Horn not working (7.7 (a))

Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed (6.1.1 (c) (i))

Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed (7.1.1 (a) (i))

Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed 2 places (6.1.1 (c) (i))

Nearside Rear Upper Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced c pillar holed (6.1.1 (c) (i))

Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed (6.1.1 (c) (i))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Upper Integral body structure is corroded but structural rigidity is not significantly reduced chassis leg (6.1.1 (c) (i))

Nearside Rear Upper Integral body structure is corroded but structural rigidity is not significantly reduced chassis leg (6.1.1 (c) (i))

Nearside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Inner Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Pass 29 Jul 2023 164,833 miles

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Nail in tyre

Offside Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

weld repairs coated

Fail 13 Jul 2023 164,678 miles

Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))

Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Offside Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Front Sub-frame corroded but not seriously weakened and suspension components (5.3.3 (b) (i))

Nearside Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Rear Tyre obviously under inflated (5.2.3 (l))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Pass 24 Jun 2022 160,732 miles

Nearside Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))

underside coated

underside has corrosion

Pass 16 Jul 2021 156,063 miles

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

corrosion in inner/outer sills/ floors/chassis legs/arches.

corrosion in most brake/suspension components.

footbrake travel long

n/s/r disc corroded

Pass 6 Jul 2020 149,243 miles

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

corrosion in most brake suspension components/floors/inner/outer sills/inner arches.

o/s/f brake binding slightly

Fail 6 Jul 2020 149,243 miles

Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

corrosion in most brake suspension components/floors/inner/outer sills/inner arches.

o/s/f brake binding slightly

Pass 21 Jun 2019 146,094 miles

inner & outer sills, inner & outer arches, chassis & suspension corroded

Fail 13 Jun 2019 146,094 miles

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength NEARSIDE FRONT CHASSIS (5.3.6 (a) (i))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength NEARSIDE FRONT OUTRIGGER (5.3.6 (a) (i))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength NEARSIDE REAR INNER ARCH (5.3.6 (a) (i))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength NEARSIDE REAR INNER SILL X 2 (5.3.6 (a) (i))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength NEARSIDE REAR OUTER SILL (5.3.6 (a) (i))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength OFFSIDE REAR OUTER SILL (5.3.6 (a) (i))

inner & outer sills, inner & outer arches, chassis & suspension corroded

Pass 5 Jul 2018 144,657 miles

play in front droplinks

suspension, floors & chassis corroded

Fail 29 Jun 2018 144,657 miles

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength OFFSIDE REAR OUTER SILL (5.3.6 (a) (i))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

headlamps slightly deteriorated

play in front droplinks

suspension, floors & chassis corroded

Pass 7 Jul 2017 139,809 miles

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

all rear suspension corroded

both wipers split on ends

front x member corroded

general corrosion in vehicle

Fail 7 Jul 2017 139,809 miles

Nearside Front Subframe mounting prescribed area is excessively corroded chassis/inner sill (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded chassis inner sill (2.4.A.3)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

all rear suspension corroded

both wipers split on ends

front x member corroded

general corrosion in vehicle

Pass 22 Mar 2016 121,735 miles
Fail 21 Mar 2016 121,735 miles

Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Pass 24 Sep 2015 116,626 miles

Both front out riggers hold but not in perscribed area

Under body of vehicle rusty

Pass 22 Oct 2014 115,471 miles

Front cross member starting to corrode

O/s/f inner sill area corroded/holed - outside prescribed area

Underbody rusted/starting to corrode in various places

Fail 21 Oct 2014 115,471 miles

Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Statutory seat belt missing (5.1.1)

Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Front cross member starting to corrode

O/s/f inner sill area corroded/holed - outside prescribed area

Underbody rusted/starting to corrode in various places

Pass 27 Aug 2013 111,519 miles

both outer sills rusting/starting to corrode

exhaust corroding in places

osf metal brake pipe rusting

osf outer cv boot perishing

vehicle underbody rusting and starting to corrode in places

Pass 14 Aug 2012 106,690 miles

both track rod ends perishing

exhaust corroding in places on centre section and backbox

inner sills rusting in places

osf outer cv boot perishing

Pass 26 Aug 2011 105,670 miles

auto gearbox sump rusting

chip in windscreen on os lower, not excessive

front and mid-sections of exhaust rusting

front discs rusting on inner edge

osf outer cv boot perishing

poor connection on horn

sump rusting

vehicle underbody rusting in places

Pass 6 Sep 2010 104,573 miles

chip in windscreen on os lower, zone 'B' no larger than 40mm

front brake discs rusting on inner edge

Pass 2 Sep 2009 99,800 miles

Front brake discs slightly pitted on inner edges

Pass 28 Feb 2008 86,468 miles

How Reliable is the Mazda Bongo?

Based on 251,584 MOT tests across 14,362 vehicles.

67.3%
Pass Rate
5,064
Miles/Year
31
Year Lifespan
14,362
On UK Roads

Top MOT Failure Points

fog lamp not working 6,854
Suspension component mounting prescribed area is excessively corroded 6,786
Windscreen wiper does not clear the windscreen effectively 6,443
Tyre tread depth below requirements of 1.6mm 5,607
Registration plate lamp not working 3,890
Full Mazda Bongo reliability report

Don't risk it. Know before you buy.

Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.

£30k guarantee Instant results Cancel anytime

S982 TGB is a 1998 Mazda Bongo in Grey with a 2,495cc diesel engine. This vehicle has been through 26 MOT tests with a personal pass rate of 69.2%.

Across all 1998 Mazda Bongo models, the average MOT pass rate is 67.1% with a typical mileage of 125,789 miles. This particular vehicle has performed better than the average for its year.

The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying S982 TGB, it's worth having these areas checked by a mechanic before committing.

The Mazda Bongo typically stays on UK roads for around 31 years. At 28 years old, this Mazda Bongo is approaching the upper end of the typical lifespan for this model.

Frequently Asked Questions

How do I check the history of S982 TGB?

You can check the full history of S982 TGB by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.

What year was S982 TGB registered?

S982 TGB is a 1998 Mazda Bongo, first registered on 31 December 1998.

Is S982 TGB safe to buy?

The MOT history for S982 TGB shows 26 tests with a 69.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.

Does S982 TGB have outstanding finance?

Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on S982 TGB. If you buy a car with outstanding finance, the finance company can repossess it.

No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.