MOT Status
ValidMileage
94,686 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pad(s) wearing thin Front Both Sides (1.1.13 (a) (ii))
Headlamp has a product on the lens but not seriously reducing light output Front Left and Right (4.1.4 (b))
Vehicle has been UnderSealed
Nearside Front Inner wheel arch holed and corroded outside prescribed area
Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Front Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))
Nearside Front Inner wheel arch holed and corroded outside prescribed area
Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))
Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Front Exhaust system insecure (6.1.2 (a))
Nearside Front Anti-roll bar linkage damaged and seriously weakened Snapped, not attached (5.3.3 (b) (i))
Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill holed and corroded central (7.1.1 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill and wheel arch (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill holed and corroded central (7.1.1 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Exhaust has a minor leak of exhaust gases Manifold area (6.1.2 (a))
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))
Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Front Exhaust mounting defective (6.1.2 (a))
Nearside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))
Offside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Front Exhaust mounting defective (6.1.2 (a))
Nearside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))
Offside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))
Front Exhaust mounting defective (6.1.2 (a))
Hazard warning switch faulty (4.4.2 (a) (i))
Nearside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))
Offside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))
Front Exhaust mounting defective (6.1.2 (a))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Offside Front Tyre not fitted in accordance with side wall instructions (5.2.3 (i))
Front Exhaust mounting defective (6.1.2 (a))
Front Exhaust mounting defective (6.1.2 (a))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps Both (4.7.1 (b) (ii))
Front Exhaust mounting defective (6.1.2 (a))
Front Subframe very corroded
Suspension component mounting prescribed area is corroded but not considered excessive Both rear chassis legs to axle bushes (5.3.6 (a) (i))
Front subframe very corroded
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
front subframe showing signs of corrosion
oil leak from o/s drive shaft seal
Front Exhaust has a major leak of exhaust gases manifold (7.1.2)
Nearside Headlamp aim too low (1.8)
Nearside Rear Brake hose ferrule excessively corroded (3.6.B.4e)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Brake hose ferrule excessively corroded (3.6.B.4e)
Rear Exhaust system not adequately supported (7.1.1)
front subframe showing signs of corrosion
oil leak from o/s drive shaft seal
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Vehicle structure has slight corrosion (6.1.A.1)
Child seat fitted not allowing full inspection of adult belt
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Rear coil spring corroded (2.4.C.1b)
Nearside rear brake binding (3.7.B.1)
Child seat fitted not allowing full inspection of adult belt
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Rear coil spring corroded (2.4.C.1b)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Centre Front Exhaust system not adequately supported (7.1.1)
Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Nearside Rear Mechanical brake component has restricted free movement (3.5.1k)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Mechanical brake component has restricted free movement (3.5.1k)
Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i) DANGEROUS
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Inner Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Toyota Aygo?
Based on 3,073,569 MOT tests across 286,185 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SA06 WRW is a 2006 Toyota Aygo in Grey with a 998cc petrol engine. This vehicle has been through 26 MOT tests with a personal pass rate of 69.2%.
Across all 2006 Toyota Aygo models, the average MOT pass rate is 73.6% with a typical mileage of 60,291 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying SA06 WRW, it's worth having these areas checked by a mechanic before committing.
The Toyota Aygo typically stays on UK roads for around 21 years. At 20 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SA06 WRW?
You can check the full history of SA06 WRW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SA06 WRW registered?
SA06 WRW is a 2006 Toyota Aygo, first registered on 13 April 2006.
Is SA06 WRW safe to buy?
The MOT history for SA06 WRW shows 26 tests with a 69.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SA06 WRW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SA06 WRW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.