2007 Mazda 6

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Exhaust emits blue smoke during acceleration (8.2.1.2 (g))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge 0n shoulders (5.2.3 (e))

Nearside Rear Outer Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Shock absorbers has light misting of oil close to excess (5.3.2 (b))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Tyre worn close to legal limit/worn on edge on shoulders (5.2.3 (e))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Subframe mounting prescribed area is corroded but not considered excessive Rear chassis rails (5.3.6 (a) (i))

nearside rear inner sill corroded

Nearside Front Position lamp light intensity significantly reduced (4.2.3 (a) (ii))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))

Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Tyre slightly damaged (5.2.3 (d) (ii))

Subframe mounting prescribed area is corroded but not considered excessive Rear chassis rails (5.3.6 (a) (i))

nearside rear inner sill corroded

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt rear most (5.3.4 (b) (ii))

Nearside Front Position lamp not working (4.2.1 (a))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt fore most (5.3.4 (b) (ii))

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front tyre damage to outer side wall

Nearside Rear Inner Brake pad(s) wearing thin close to 1.5mm limit (3.5.1g)

Offside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt front arm (2.4.G.2)

Offside Front Tyre worn close to the legal limit on 2mm (4.1.E.1)

nearside and offside rear brake bind

Exhaust corroded

General corrosion to various suspension components

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt Rearmost arm (2.4.G.2)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside front tyre outer sidewall damaged

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt Foremost arm (2.4.G.2)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Various suspension bushes showing signs of age cracking

Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt Foremost arm (2.4.G.2)

Nearside Front Valve stem seriously damaged (4.1.D.1e)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Valve stem seriously damaged (4.1.D.1e)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Valve stem seriously damaged (4.1.D.1e)

Exhaust corroded

General corrosion to various suspension components

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt Rearmost arm (2.4.G.2)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside front tyre outer sidewall damaged

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt Foremost arm (2.4.G.2)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Various suspension bushes showing signs of age cracking

Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt rear arm (2.4.G.2)

Rear Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt both (2.4.G.2)

Under-trays fitted obscuring some underside components