MOT Status
ValidMileage
83,089 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
handbrake slight travel
Brake pipe corroded, covered in grease or other material both front to rears (1.1.11 (c))
Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Front Brake pad(s) wearing thin worn (needs attention) (1.1.13 (a) (ii))
Front Service brake fluctuating, but not excessively both fronts (1.2.1 (e))
Front Upper Macpherson strut mounting corroded but not seriously weakened both fronts (5.3.3 (b) (i))
Front Vehicle structure is corroded but structural rigidity is not significantly reduced both sides (6.1.1 (c) (i))
Items removed from driver's view prior to test ()
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened worn (needs attention) (1.1.14 (a) (ii))
Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened worn (needs attention) (1.1.14 (a) (ii))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))
Rear Brake hose has slight corrosion to ferrule both rears (1.1.12 (f) (i))
Rear Brake pipe corroded, covered in grease or other material both rears (1.1.11 (c))
Rear Coil spring corroded both rears (5.3.1 (b) (i))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Rear Service brake fluctuating, but not excessively both rears (1.2.1 (e))
Rear Shock absorbers has slight external damage to the casing both rear casings corroded (5.3.2 (b))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))
Rear Tyre slightly damaged/cracking or perishing both rears (155/65x14) (5.2.3 (d) (ii))
Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive both rears (5.3.6 (a) (i))
both sills corroded
co level high
surface corrosion underneath on some components and under body
Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Bumper damaged and likely to cause injury when grazed or contacted (6.1.4 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle mounting area (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle mounting strengthening plate (5.3.6 (a) (i))
Offside Front Macpherson strut corroded and seriously weakened (5.3.3 (b) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower wheel arch (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Lower Brake hose ferrule excessively corroded (1.1.12 (f) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle mounting area (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle mounting strengthening plate (5.3.6 (a) (i))
Rear Brakes imbalanced across an axle (1.2.1 (b) (i))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Rear Brake pipe at imminent risk of failure or fracture (1.1.11 (a)) DANGEROUS
Front Exhaust mounting defective (6.1.2 (a))
Front Seat belt anchorage prescribed area is corroded but not considered excessive floor (7.1.1 (a) (i))
Inner Suspension component mounting prescribed area is corroded but not considered excessive sills (5.3.6 (a) (i))
Nearside Rear Brake hose has slight corrosion to ferrule both (1.1.12 (f) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive wheel arch (5.3.6 (a) (i))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Suspension component corroded but not seriously weakened axle (5.3.3 (b) (i))
Rear Suspension component corroded but not seriously weakened shock absorbers (5.3.3 (b) (i))
Front Exhaust mounting defective (6.1.2 (a))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge worn on edges of tread (5.2.3 (e))
Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Front Exhaust mounting defective (6.1.2 (a))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge worn on edges of tread (5.2.3 (e))
Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Brake lever has insufficient reserve travel (1.1.2 (a))
Exhaust system insecure (6.1.2 (a))
Front Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS
Front Exhaust mounting defective (6.1.2 (a))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Nearside Front Anti-roll bar linkage pin or bush likely to become detached (5.3.4 (a) (ii)) DANGEROUS
Front Exhaust mounting defective (6.1.2 (a))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Front Inner brake disc in such a condition that it is seriously weakened (3.5.1i)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
How Reliable is the Toyota Aygo?
Based on 3,073,569 MOT tests across 286,185 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SA08 MVG is a 2008 Toyota Aygo in Silver with a 998cc petrol engine. This vehicle has been through 26 MOT tests with a personal pass rate of 65.4%.
Across all 2008 Toyota Aygo models, the average MOT pass rate is 74.7% with a typical mileage of 54,541 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying SA08 MVG, it's worth having these areas checked by a mechanic before committing.
The Toyota Aygo typically stays on UK roads for around 21 years. At 18 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SA08 MVG?
You can check the full history of SA08 MVG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SA08 MVG registered?
SA08 MVG is a 2008 Toyota Aygo, first registered on 10 March 2008.
Is SA08 MVG safe to buy?
The MOT history for SA08 MVG shows 26 tests with a 65.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SA08 MVG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SA08 MVG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.