MOT Status
ExpiredMileage
136,130 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pedal wearing smooth (1.1.2 (c))
Central Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened inner (1.1.14 (a) (ii))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Offside Brake disc worn, pitted or scored, but not seriously weakened inner (1.1.14 (a) (ii))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
rear exhaust heat shield loose
Brake pedal wearing smooth (1.1.2 (c))
Central Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Headlamp aim too high (4.1.2 (a))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened inner (1.1.14 (a) (ii))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Offside Brake disc worn, pitted or scored, but not seriously weakened inner (1.1.14 (a) (ii))
Offside Front Headlamp aim too high (4.1.2 (a))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
rear exhaust heat shield loose
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Indicator tell-tale inoperative (4.9.1 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Exhaust mounting defective system corroded (6.1.2 (a))
Front Coil spring corroded both (5.3.1 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Lower Shock absorbers has a slightly worn bush perished (5.3.2 (c))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear arm bush perished (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear arm bush perished (5.3.4 (a) (i))
Offside Rear Lower Shock absorbers has a slightly worn bush perished (5.3.2 (c))
Rear Sub-frame corroded but not seriously weakened axle (5.3.3 (b) (i))
Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Exhaust mounting defective system corroded (6.1.2 (a))
Front Coil spring corroded both (5.3.1 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Lower Shock absorbers has a slightly worn bush perished (5.3.2 (c))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear arm bush perished (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear arm bush perished (5.3.4 (a) (i))
Offside Rear Lower Shock absorbers has a slightly worn bush perished (5.3.2 (c))
Rear Sub-frame corroded but not seriously weakened axle (5.3.3 (b) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear axle corroded
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
exhaust system corroded
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Headlamp aim too low (4.1.2 (a))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Headlamp aim too low (4.1.2 (a))
Offside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear axle corroded
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
exhaust system corroded
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))
Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Brake pipe slightly corroded both front to rear at rear hose (3.6.B.2c)
Front brake discs corroding on inner surface
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement rear (2.4.G.2)
Nearside Rear Outer Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Outer Brake pipe slightly corroded (3.6.B.2c)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Shock absorber has slight corrosion to the casing both rear (2.7.2a)
exhaust corroded
Brake pipe slightly corroded both front to rear (3.6.B.2c)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement rear (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Rear Outer Brake pipe slightly corroded (3.6.B.2c)
exhaust corroded at rear joint and mountings
oil leak/s
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement rear (2.4.G.2)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Outer Brake pipe slightly corroded (3.6.B.2c)
rear exhaust joint corroded
Offside rear brake binding (3.7.B.1)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Parking brake lever has little reserve travel (3.1.6b)
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Parking brake lever has little reserve travel (3.1.6b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Toyota Auris?
Based on 2,200,162 MOT tests across 179,856 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SA10 YHB is a 2010 Toyota Auris in Grey with a 1,364cc diesel engine. This vehicle has been through 18 MOT tests with a personal pass rate of 66.7%.
Across all 2010 Toyota Auris models, the average MOT pass rate is 78.8% with a typical mileage of 58,722 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Auris fails its MOT is windscreen wiper does not clear the windscreen effectively, accounting for 13,783 recorded failures. If you're considering buying SA10 YHB, it's worth having these areas checked by a mechanic before committing.
The Toyota Auris typically stays on UK roads for around 19 years. At 16 years old, this Toyota Auris is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SA10 YHB?
You can check the full history of SA10 YHB by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SA10 YHB registered?
SA10 YHB is a 2010 Toyota Auris, first registered on 27 March 2010.
Is SA10 YHB safe to buy?
The MOT history for SA10 YHB shows 18 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SA10 YHB have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SA10 YHB. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.